Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

Finally Dyno'd

Thread Tools
 
Search this Thread
 
Old Jul 18, 2010 | 01:26 PM
  #1  
StreetKing's Avatar
StreetKing
Thread Starter
|
Tourer
Joined: Apr 2007
Posts: 429
Likes: 0
From: Johnstown Co.
Default Finally Dyno'd

I went to Dyno-Power in north east Ohio. Being from Michigan it wasn't a bad drive, right over the border.I'll tell you they were great. Mark was the tech that tuned my scoot. He answered all my questions and gave me a run down on everything.The place was clean as a whistle, had a state of art Dyno room. I have a RK '08 with 6-6 Woods cams,PC3,FuelMoto pipes,B/suckerA/C.The #s are 84hp & 93tq. That's what I was looking for. Great job Mark. As soon as I fine out how to copy and paste the chart I will.
 
Reply
Old Jul 18, 2010 | 01:34 PM
  #2  
simpkinst's Avatar
simpkinst
Road Warrior
Joined: Feb 2008
Posts: 1,301
Likes: 7
Default

Originally Posted by StreetKing
I went to Dyno-Power in north east Ohio. Being from Michigan it wasn't a bad drive, right over the border.I'll tell you they were great. Mark was the tech that tuned my scoot. He answered all my questions and gave me a run down on everything.The place was clean as a whistle, had a state of art Dyno room. I have a RK '08 with 6-6 Woods cams,PC3,FuelMoto pipes,B/suckerA/C.The #s are 84hp & 93tq. That's what I was looking for. Great job Mark. As soon as I fine out how to copy and paste the chart I will.
just curius where this shop is and live in NE Ohio.

East Michigan is west Ohio, so not sure if this was a typo. Just across the border would be NW OHIO.
 
Reply
Old Jul 18, 2010 | 02:20 PM
  #3  
StreetKing's Avatar
StreetKing
Thread Starter
|
Tourer
Joined: Apr 2007
Posts: 429
Likes: 0
From: Johnstown Co.
Default

just above Toledo
 
Reply
Old Jul 18, 2010 | 05:04 PM
  #4  
adedeluk's Avatar
adedeluk
Intermediate
Joined: Mar 2010
Posts: 26
Likes: 0
From: SE Michigan
Default

Originally Posted by StreetKing
I went to Dyno-Power in north east Ohio. Being from Michigan it wasn't a bad drive, right over the border.I'll tell you they were great. Mark was the tech that tuned my scoot. He answered all my questions and gave me a run down on everything.The place was clean as a whistle, had a state of art Dyno room. I have a RK '08 with 6-6 Woods cams,PC3,FuelMoto pipes,B/suckerA/C.The #s are 84hp & 93tq. That's what I was looking for. Great job Mark. As soon as I fine out how to copy and paste the chart I will.
I also had my 2004 Ultra Classic dynoed by Dyno Power in Ohio. I also have the same opinion about Mark as StreetKing. They are located at 1523 W.Laskey Rd. Toledo, OH 43612 Telephone 419-478-7940
 
Reply
Old Jul 18, 2010 | 05:44 PM
  #5  
2WheelGlider's Avatar
2WheelGlider
Road Master
Joined: May 2009
Posts: 930
Likes: 4
From: Jacksonville, FL
Default

Glad to hear you had a nice experiance, always good to hear about good shops. Pretty nice numbers.
 
Reply
Old Jul 18, 2010 | 05:49 PM
  #6  
simpkinst's Avatar
simpkinst
Road Warrior
Joined: Feb 2008
Posts: 1,301
Likes: 7
Default

Originally Posted by StreetKing
I went to Dyno-Power in north east Ohio. Being from Michigan it wasn't a bad drive, right over the border.I'll tell you they were great. Mark was the tech that tuned my scoot. He answered all my questions and gave me a run down on everything.The place was clean as a whistle, had a state of art Dyno room. I have a RK '08 with 6-6 Woods cams,PC3,FuelMoto pipes,B/suckerA/C.The #s are 84hp & 93tq. That's what I was looking for. Great job Mark. As soon as I fine out how to copy and paste the chart I will.
thanks for the details..I have been looking for a good tuner and Toledo is only a 2 hr ride.

Did they ever complete all that road construction in Michigan north ot Toledo? boy was that a mess for awhile. looks like they were building a new highyway or something. Asking since if I'm up that way - will need to stop at Cabela's. I here the mounts are worth the trip.
 
Reply
Old Jul 18, 2010 | 08:28 PM
  #7  
Dalbergia's Avatar
Dalbergia
Tourer
Joined: Jul 2010
Posts: 277
Likes: 0
From: Central Ohio
Default

Originally Posted by simpkinst
thanks for the details..I have been looking for a good tuner and Toledo is only a 2 hr ride.
Check out Roeder Racing, they are on Route 20 about halfway between Cleveland and Toledo (a couple miles east of where Rt 4 and Rt 20 meet). Depending on where that two hours to Toledo starts, they may be closer, too.

They did my tune, I am happy with the results. At least one of the guys from the shop is a member here, goes by harleytuner...
 
Reply
Old Jul 19, 2010 | 07:00 AM
  #8  
StreetKing's Avatar
StreetKing
Thread Starter
|
Tourer
Joined: Apr 2007
Posts: 429
Likes: 0
From: Johnstown Co.
Default

hope this worked
 
Attached Thumbnails Finally Dyno'd-dyno-002.jpg  
Reply
HD Forum Stories

The Best of Harley-Davidson for Lifelong Riders

story-0

7 Times Harley-Davidson Chucked Tradition Out the Window

 Verdad Gallardo
story-1

7 Surprising Harley-Davidson Products that Are Not Motorcycles

 Verdad Gallardo
story-2

8 Best Harley-Davidson Motorcycles Ever

 Pouria Savadkouei
story-3

10 Worst Harley-Davidson Motorcycles Ever

 Pouria Savadkouei
story-4

Killer Custom's Jail Break Is The Breakout That Refused to Blend In

 Verdad Gallardo
story-5

Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?

 Verdad Gallardo
story-6

Harley-Davidson Reveals Super Cool Cafe Racer Concept

 Verdad Gallardo
story-7

Engraved Rebellion: Inside Bundnerbike's Glam Rock II

 Verdad Gallardo
story-8

10 Motorcycles You Should Never Buy

 Joe Kucinski
story-9

10 Things Harley-Davidson Needs to Fix in 2026

 Verdad Gallardo
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RFC1962
The Dyno Room
3
Apr 21, 2019 02:41 PM
PearlWhiteGT
General Harley Davidson Chat
3
Jul 9, 2012 07:06 AM
dkitch
Touring Models
6
Aug 1, 2010 07:32 PM
HartwellHog
Touring Models
2
Apr 16, 2010 10:29 PM
Heymikey
Ignition/Tuner/ECM/Fuel Injection
0
Jul 12, 2006 09:08 PM




All times are GMT -5. The time now is 06:42 PM.

story-0
7 Times Harley-Davidson Chucked Tradition Out the Window

Slideshow: Harley-Davidson built its reputation on nostalgia, but every so often, the company took a hard left turn into the future.

By Verdad Gallardo | 2026-05-20 11:18:19


VIEW MORE
story-1
7 Surprising Harley-Davidson Products that Are Not Motorcycles

Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.

By Verdad Gallardo | 2026-04-29 16:50:35


VIEW MORE
story-2
8 Best Harley-Davidson Motorcycles Ever

Slideshow: Not every Harley gets it right, but these are the ones that genuinely earned their reputation.

By Pouria Savadkouei | 2026-04-15 14:23:21


VIEW MORE
story-3
10 Worst Harley-Davidson Motorcycles Ever

Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.

By Pouria Savadkouei | 2026-04-01 20:01:09


VIEW MORE
story-4
Killer Custom's Jail Break Is The Breakout That Refused to Blend In

Slideshow: Killer Custom's "Jail Breaker" build focuses more on stance and visual aggression than mechanical overhaul.

By Verdad Gallardo | 2026-03-18 19:20:32


VIEW MORE
story-5
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?

Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.

By Verdad Gallardo | 2026-03-07 16:15:30


VIEW MORE
story-6
Harley-Davidson Reveals Super Cool Cafe Racer Concept

Slideshow: Harley-Davidson's new RMCR concept revives the café racer formula with modern hardware-and it may be exactly the reset the company needs.

By Verdad Gallardo | 2026-03-04 12:23:37


VIEW MORE
story-7
Engraved Rebellion: Inside Bundnerbike's Glam Rock II

Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.

By Verdad Gallardo | 2026-02-24 18:19:44


VIEW MORE
story-8
10 Motorcycles You Should Never Buy

Slideshow: There is no shortage of great motorcycles to buy, but we would avoid these ten.

By Joe Kucinski | 2026-02-19 14:50:51


VIEW MORE
story-9
10 Things Harley-Davidson Needs to Fix in 2026

Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.

By Verdad Gallardo | 2026-01-13 18:33:17


VIEW MORE