When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I went with a PacJack; it's on order so I won't know until it arrives; it's a gas-powered shock - http://pakjack.com/
Yea, whats with the picture of the guy in the suit!!!!!!
Like,You must want one... look how happy this guy in the suit is!!!!!
You can buy gas powered shocks at almost any auto parts store....with a large variety of sizes........o~`o..........
I paid 30 bucks for mine at the stealer. I tried everything to make my stock one not twist itself into the way. this thing worx great. it does let my pack open further and the gauge of wire does concern me a bit, but then I think, I fly famous rich people on wires this size on a regular basis over the heads of the audience so it is probably fine. not planning on rigging a bag of cement to my lid anyways.
I installed mine a few weeks ago with no problems, but like others it scared me to when I first opened the lid, I did not think that it would ever stop. Now when I open it I keep a hold of the lid and let it extend. The best thing about it is that you don't have to worry about pushing the cord back under the tour pak lid... this is good stuff
I'd gotten in the habit of grabbing the cable when I open the lid, so I can keep a little tension on it and not hit the fully open position so hard. I also grab the cable to start the lid closing. Both woth fine with the retractable - and it never ends up hanging out...
If you put a half turn in the original tether by making a loop in it (by rotating the cable at the lid end 1 turn) the cable will self loop towards the rear of the TP and generally place itself out of the way when you close the lid.
I don't recall which way to turn it but you will know when it's right. I think it's clockwise looking toward the front of the bike, but you can easily check it and correct it.
Works fine for me-- don't like the retractable-- too flimsy.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.