Nightstick Install

Reply Subscribe

Thread Tools

Search this Thread

Oct 16, 2010 | 07:48 PM

sanlyn

Thread Starter

Road Master

Joined: Jul 2009

Posts: 1,221

Likes: 9

From: Monmouth, OR

Nightstick Install

Installed the Nightstick muffler on my 2010 FLTRX. Slight improvement from stock in sound, but really like the looks. My only issue is I have it on the headpipe as far as it goes, and there is still almost an inch space between the heatshield and the main body of the pipe. I've looked at it, and I don't see where it can go on any further as the pipe gets wider at that point. Any suggestions???

Oct 16, 2010 | 11:30 PM

JsGlide

Novice

Joined: Oct 2010

Posts: 21

Likes: 0

From: West Virginia

I put one on my glide also, I have the same issue. I just learned to live with it. I am going to put a full system on before it is all said and done with.

Oct 17, 2010 | 08:15 AM

hydrolock43

Road Captain

Joined: Apr 2010

Posts: 709

Likes: 1

From: Maine

Quote:

Originally Posted by sanlyn

Thats how it is. You need to cut the headpipe in half at the cat and dig it out then weld it together. Very good upgrade with the Night stick. You will need a pcv or down load after though. The oxygen sensor cross talk issue is bull as far as i can see as the two sensors are in front of the cat material to start with. They are not seperated by any means by the cat period.