FM 107 kit completed
Thread Starter
|
Novice
Joined: Feb 2011
Posts: 15
Likes: 0
FM 107 kit completed
98HP/124TQ
Went well, had the cam timing off the first go around, fixed that and now getting better numbers from the dyno. I think I'd have a little more HP if I didn't have the thunder header setup, but I'm not that picky.
Went well, had the cam timing off the first go around, fixed that and now getting better numbers from the dyno. I think I'd have a little more HP if I didn't have the thunder header setup, but I'm not that picky.
I believe this tune was done by Ed at The Dyno Difference, he uses a Dynostar dyno and the numbers will be slighly different than a Dynojet dyno. He does a great job tuning.
__________________
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
Road Master
Joined: Nov 2009
Posts: 1,171
Likes: 1
From: SE Michigan
124 ft/lbs of pure entertainment!.......Nice numbers, I am right in the middle of my 107 Fuel Moto Install.
Trending Topics
Thread Starter
|
Novice
Joined: Feb 2011
Posts: 15
Likes: 0
Sorry for the lack of details. I had to get a ride in before the rain tomorrow.
2011 SG - Fuel Moto 107kit (no head work). The kit used the TW555 Cam with Woods Directional Lifters. The install went smoothly with the exception of my improper alignment of the cam.
I installed my cam with a tooth off so the timing was wrong. Found this during my dyno where I realized my CCP was only 150psi in each cylinder. With the timing off, the bike produced 92HP/104TQ.
Fixed the timing, CCP is now sitting at 200psi, and back to the tuner this morning. Bike runs very well now and produced 98HP and 124TQ.
I think my HP might be a tad low, I would expect this might be due to the thunder header setup or as Jamie mentioned the difference in dyno setups.
I don't really care about numbers, I care about the ride and it runs and rides very well, I'm real glad I did this.
The guys at fuel moto were very helpful, great customer service.
2011 SG Fuel Moto 107Kit (555cam); SE Easy Install pushrods and covers, SE Heavy Breather, Thunderheader 2-1 Headers and Exhaust
2011 SG - Fuel Moto 107kit (no head work). The kit used the TW555 Cam with Woods Directional Lifters. The install went smoothly with the exception of my improper alignment of the cam.
I installed my cam with a tooth off so the timing was wrong. Found this during my dyno where I realized my CCP was only 150psi in each cylinder. With the timing off, the bike produced 92HP/104TQ.
Fixed the timing, CCP is now sitting at 200psi, and back to the tuner this morning. Bike runs very well now and produced 98HP and 124TQ.
I think my HP might be a tad low, I would expect this might be due to the thunder header setup or as Jamie mentioned the difference in dyno setups.
I don't really care about numbers, I care about the ride and it runs and rides very well, I'm real glad I did this.
The guys at fuel moto were very helpful, great customer service.
2011 SG Fuel Moto 107Kit (555cam); SE Easy Install pushrods and covers, SE Heavy Breather, Thunderheader 2-1 Headers and Exhaust
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Road Master
Joined: Jun 2008
Posts: 868
Likes: 1
From: Trenton,N.J.
Is this with headwork??