Brake light modules

Reply Subscribe

Thread Tools

Search this Thread

Nov 29, 2011 | 06:49 PM

#21

JHC210

Road Master

Joined: Jun 2010

Posts: 936

Likes: 55

From: C. Texas

Rustell,

Did you have to cut your tailight wires? Any pics?

JHC

Quote:

Originally Posted by Rustell

I use a Hyperlites kit...2 flashing Leds on either side
of the license plate.They flash for about 5 seconds then
go solid when you apply the brakes.

http://hyperlites.com/

Nov 29, 2011 | 06:58 PM

#22

D-9 OPERATOR

Cruiser

Joined: Jan 2009

Posts: 160

Likes: 0

From: CALIFORNIA

Quote:

Originally Posted by TUCCI

I bought the Bandlander kit that includes two red OEM replacement lens covers...how simple can you get.

Awesome kit went with led's & smoked lenses bright and awesome

Nov 29, 2011 | 07:09 PM

#23

ReidRik_Von

Road Captain

Joined: Aug 2010

Posts: 669

Likes: 27

From: Bothell, WA

Quote:

Originally Posted by frenchbiker

I have the HD module that transformed my turn signals into running lights and brake lights.
I tweaked it to eliminate the running lights because switching from running light to brake light was not noticeable enough.

I went with the brightasslights BAL1 and the Biketronics BT 500 tail runner:
http://www.biketronics.com/products/...ailRunner.html

I have a 09 FLHP that has the fender tip light and I too felt that the HD run brake kit didn't have enough difference between run and braking on the rear turn signals. THe biketronics turn signal burns the turn signals at 100 percent until they are flashing for a turn.