HEATED GEAR for 2
Thread Starter
|
6th Gear
Joined: Dec 2010
Posts: 11
Likes: 0
From: Santa Rosa,Ca
HEATED GEAR for 2
Is there enough wattage output for 2 riders? I am currently wired straight to the batt. with in-line 15a fuse for my GERBING 71w jacket liner.
Thinking about adding a Passnger Harness if theres enough wattage to handle.
04' FLHRI with no other electrical acssesorys.
Thanks in Advance for your Help.
John
Thinking about adding a Passnger Harness if theres enough wattage to handle.
04' FLHRI with no other electrical acssesorys.
Thanks in Advance for your Help.
John
Seasoned HDF Member
Joined: Sep 2005
Posts: 5,072
Likes: 104
From: Prescott, AZ
My ride is an 04 EG - 61K = we both run gerbings when needed plus I also run a Garmin Zumo - No problems in the 61K
To prolong battery life - I Always plug in my Battery Tender when parked in the Garage - I swear by it - in helping ot proling battery life..
To prolong battery life - I Always plug in my Battery Tender when parked in the Garage - I swear by it - in helping ot proling battery life..
Ultimate HDF Member
Joined: May 2008
Posts: 7,439
Likes: 884
From: 'Noke, VA
I can't remember what the stator on an '04 is rated at. 38 amps is what comes to mind, I know the new bikes are 50 amps. The Gerbing's site has the draw for each item listed, so it's pretty simple to do the math and figure out what you can get away with. IIRC, you need right around 12 amps to run a fuel injected Ultra.
Seasoned HDF Member
Joined: Sep 2005
Posts: 5,072
Likes: 104
From: Prescott, AZ
I can't remember what the stator on an '04 is rated at. 38 amps is what comes to mind, I know the new bikes are 50 amps. The Gerbing's site has the draw for each item listed, so it's pretty simple to do the math and figure out what you can get away with. IIRC, you need right around 12 amps to run a fuel injected Ultra.
Thread
Thread Starter
Forum
Replies
Last Post
