Wheel bearings

Reply Subscribe

Thread Tools

Search this Thread

Dec 26, 2011 | 02:32 PM

NMNSG08

Thread Starter

Road Captain

Joined: Jan 2009

Posts: 519

Likes: 1

From: woburn,ma

Wheel bearings

I am looking to replace the wheel bearings on my 08 sg. Does anyone know of a beeter one than the moco one,maybe a timken? I so were can i buy them and does anyone have a part # for them,thanks.

Dec 26, 2011 | 02:39 PM

Stiggy

Seasoned HDF Member

Joined: Nov 2010

Posts: 17,548

Likes: 7,175

From: Oxford, Nc

Search " Cheap wheel bearings." There is a thread going on right now.

Dec 26, 2011 | 04:22 PM

dawg

Seasoned HDF Member

Joined: Jun 2006

Posts: 28,524

Likes: 3,953

From: Vermont

Do you have ABS? If so, you're stuck with HD for the ABS side. What tool you are you using to pull and replace? I use the pit posse tool and it works slicker than snot and is priced right to boot.

Dec 26, 2011 | 04:26 PM

NMNSG08

Thread Starter

Road Captain

Joined: Jan 2009

Posts: 519

Likes: 1

From: woburn,ma

Non-abs. I haven't gotten the tools yet.

Dec 26, 2011 | 04:28 PM

chefie

Novice

Joined: Dec 2011

Posts: 15

Likes: 0

From: Easton, MD

since you have non abs check this website out http://www.hammercustomcycles.com/Vi...er=25mmbrngsWD

Dec 26, 2011 | 05:31 PM

hatchetman

Road Warrior

Joined: Nov 2008

Posts: 1,595

Likes: 8

From: Vancouver Island British Colombia Canada

Quote:

Originally Posted by chefie

since you have non abs check this website out http://www.hammercustomcycles.com/Vi...er=25mmbrngsWD

Pull the races while your in there, Than it's all good!
hatch.

Dec 26, 2011 | 05:47 PM

dawg

Seasoned HDF Member

Joined: Jun 2006

Posts: 28,524

Likes: 3,953

From: Vermont

THIS is the tool I use. Works great, priced right and has 25mm, 3/4 and 1" collets all included.

Trending Topics

1979 XLH 1000 - a good year?

111

2.6k
Oil pressure sensor 2002 Heritage Classic

24

529
What would cause this Front Tire failure?

23

1.1k
Top end rebuild Go Big or Stay Home?

97

3.7k
Valve Train Noise

46

1.3k

Dec 26, 2011 | 07:27 PM

inthechateau

Road Captain

Joined: Mar 2005

Posts: 566

Likes: 2

From: Aberdeen, Md

I pulled mine last year while changin the tire, found the bearings in bad shape. They had timkin numbers on them. Went to NAPA and got the bearings and races for under $30. I used a standard slide hammer wheel bearing puller and a size correct driver punch for driver installer. Was done both sides in 30 min after I got wheel back from shop with new tire.