4 way flashers
01-01-2012, 08:26 PM
Road Warrior
Thread Starter
Join Date: Jan 2006
Location: Staten island NY
Posts: 1,620
4 way flashers
Does any one know if on the 2012 UC Limited has 4 way flashers?? I tried and a friend tried but seems there are missing on mine... DID HD do away with the safety issue?
01-01-2012, 08:37 PM
Join Date: Aug 2009
Location: Villa Rica, GA
Posts: 603
I don't have a 12 but I'm assuming they would be turned on the same way...hold both left and right signal buttons down at the same time.
01-01-2012, 08:38 PM
Join Date: Jan 2011
Location: Leesburg, FL
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
4- way flashes
Push both the right and the left turns at same time..VOILA! 4 ways!!!
READ yOUR MANUAL!
Postman
01-02-2012, 09:04 AM
Road Warrior
Thread Starter
Join Date: Jan 2006
Location: Staten island NY
Posts: 1,620
done the both at same time, had a 03,05,07 not my first UC rodeo.. had buddy also attempt, not his first either,, still nothing
01-02-2012, 09:24 AM
Join Date: Jun 2010
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
I wouldnt be surprised if the moco took them out of the new bikes to save a buck..
01-02-2012, 09:29 AM
Join Date: Jun 2011
Location: MO
Posts: 1,386
I tried them on my '11 Street Glide a while back and couldn't get them to come on. After reading this post, I got my owner's manual out and on page 46 it lists them. I guess I didn't hold the buttons down long enough. Maybe HD lengthened the time you have to hold down the buttons?
01-02-2012, 09:30 AM
Join Date: Mar 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
4 ways
We have an '11 Ultra Limited and we have them..just have to hold both signal buttons in for about 5 secs. and they come on fine....our bike was a November build.
01-02-2012, 09:51 AM
Join Date: Aug 2011
Location: Tampa Fl
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
You have 'em, they're required by Federal Law
01-02-2012, 10:00 AM
Road Warrior
Thread Starter
Join Date: Jan 2006
Location: Staten island NY
Posts: 1,620
looking at the post, maybe have to hold them down a little longer, will give it a try
01-02-2012, 10:04 AM
Join Date: Aug 2007
Location: Calgary, Alberta
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
On my 12 FLHXSE you need to have the ignition in either the on or accessory position to engage the 4 ways. Same for disengaging.