tool kit
Thread Starter
|
Cruiser
Joined: Mar 2010
Posts: 152
Likes: 0
tool kit
i keep hearing everyone talk about their toolkit that came with the bike.All i got was a orange multi tool with a few screw drivers ,a couple torx heads and small wrenched , no 36 mm . did i get hosed or what?
Road Master
Joined: Oct 2007
Posts: 1,231
Likes: 0
From: Nor-Kal
Nope.. The factory toolkit leaves a lot to be desired.. I carry a few rolls with enough to do some major roadside surgery if necessary.
The Cruz Tools Road Tech H3 and EconoKit EL1 are a really good starting point, a couple of spare tie straps, a good flashlight and a portable soldering kit rounds that out pretty nicely.
The Cruz Tools Road Tech H3 and EconoKit EL1 are a really good starting point, a couple of spare tie straps, a good flashlight and a portable soldering kit rounds that out pretty nicely.
Road Master
Joined: Oct 2007
Posts: 1,231
Likes: 0
From: Nor-Kal
Forgot to mention the emergency tire repair kit.. If you are in the middle of nowhere and pick up a nail it could come in handy. I hope I never have to use that one. I have AAA platinum roadside assistance so 200 miles out should keep me covered, but YOU NEVER KNOW...
Seasoned HDF Member
Joined: Sep 2009
Posts: 25,306
Likes: 2,443
From: Eastern NE
Me too, but the standard tools are something to be desired (cheap). I've swapped and added a few of my own - didn't want to rely on cheap Chinese metal to get me out of a roadside jam...
Trending Topics
I think it may have been 2011, I have a 2010 and have the same exact kit that came with my 2007, I have a partner who has a 2011, he has an el-cheapo kit.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Tourer
Joined: Jun 2009
Posts: 447
Likes: 11
From: Bronxville ny
My 2010 limited came with the cheap POS orange tool kit.
Thread Starter
|
Cruiser
Joined: Mar 2010
Posts: 152
Likes: 0
thanks for the response i keep the basics with me and a 12 volt compressor for flats but the reason i was asking is i changed my lowers on my bike and i heard people say to use the 36mm wrench for the upper fork nut and assumed i had one til i looked haha i had to run all over and find a 1 3/8 wrench