Electra glide ideas needed
Ultimate HDF Member
Joined: Dec 2007
Posts: 9,254
Likes: 283
From: Lake City, Florida (Native)
Black Forks and Cans up Front ..
Painted Inner Fairing and Ignition Bar while doing this also changed to a LRS 8" Ultra Shield and swapped out the Air Temp Gauge for an Oil Temp ..
Freedom True Duals with Python Slip Ons and K&N High Flow Air Filter ..
SE 255 Cams which rounded the Power nicely off until do a rebuild and then may go more radical on Cams ..
Painted Inner Fairing and Ignition Bar while doing this also changed to a LRS 8" Ultra Shield and swapped out the Air Temp Gauge for an Oil Temp ..
Freedom True Duals with Python Slip Ons and K&N High Flow Air Filter ..
SE 255 Cams which rounded the Power nicely off until do a rebuild and then may go more radical on Cams ..
Road Captain
Joined: Jun 2010
Posts: 667
Likes: 9
So why would you even chime in?
Road Master
Joined: Feb 2012
Posts: 1,124
Likes: 4
From: pittsburgh, pa
My '04 has highway cams, high flow air cleaner, supertuner, true duals w/Wild Pig Pipes 2" baffles and a hydraulic clutch. Hyperlites brake light strobes and Motolight driving lights. All my $$$ have gone for modest performance increases and safety. I'm still trying to pay the sucker off, so the bling will have to wait. 
Cruiser
Joined: Apr 2008
Posts: 183
Likes: 0
From: West Virginia
Not a real good pic but here ya go! I swapped all my lighting except the headlight and passing lamps to LED, smoked covers, new windshield, and selecitive placing of chrome here and there. I also the saddlebag gaurds to a buddy who just had the crash bar and wanted gaurds. Annnnd, it never stops.. lol
Nice!
Not a real good pic but here ya go! I swapped all my lighting except the headlight and passing lamps to LED, smoked covers, new windshield, and selecitive placing of chrome here and there. I also the saddlebag gaurds to a buddy who just had the crash bar and wanted gaurds. Annnnd, it never stops.. lol
Cruiser
Joined: Apr 2008
Posts: 183
Likes: 0
From: West Virginia
Thanks! they are made by Tailgunner, the same company that makes the rotary cannons. I liked the look of them and wanted something a little different when the chrome started peeling off the screamin' eagles that I had on there. They don't sound bad either, nice deep rumble down low, but at highway speeds, they don't deafen everybody (or the wife) around. lol
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
