******The "OFFICIAL" Custom Bagger Build/Tech/Pic Thread******
Road Warrior
Joined: Sep 2006
Posts: 1,929
Likes: 301
From: moved to Florida!
Mine is in shop now
Bad Dad shaved stretched bags
bad dad all in one fender
12''yaffe apes
lots of black powdercoated parts
custom orange paint(inferno orange metallic) New camaro orange
custom airbrushing
will get a 21-23'' soon
here are some pics
The RS is the shop airbrushing skills. The RS is NOT on my bike. Its on a camaro. Just showing skills
Bad Dad shaved stretched bags
bad dad all in one fender
12''yaffe apes
lots of black powdercoated parts
custom orange paint(inferno orange metallic) New camaro orange
custom airbrushing
will get a 21-23'' soon
here are some pics
The RS is the shop airbrushing skills. The RS is NOT on my bike. Its on a camaro. Just showing skills
Jerry
Tourer
Joined: Jan 2012
Posts: 325
Likes: 0
From: us
I didnt get any of the airbrushing done. I will get that done later. Im wanting to do a big airbrush design.Bags, fender,tank,fairing,etc.
I did just put on a
solo lepera bare bones
grips
yaffe turn signal eliminators
yaffe yaxle
night train tank emblems
extended headling visor
21'' black spoke wheel with matching rotors
Tourer
Joined: Aug 2008
Posts: 269
Likes: 5
2009 FLHX. I bought it brand new and started tearing it down at 1km (0.6 miles).
The project started with building my home made powdercoating oven (4x4x4) and designing some kind of digital temperature control unit (the oven uses 18600 watts of oven elements and runs on two 220V outlets).
I tore down the engine and started a 124" build (DarkHorse crank, Baisley heads, SE throttle body/injectors, SE Heavy Breather with a rotation plate/spacer that I designed and had machined at the high school machine shop, SE compensator, Woods cams, Axtell cylinders/pistons, Boarzilla exhaust, etc...).
I powdercoated most of my parts flat black, a few were gloss black.
Put on some TopShop extended bags and extended fender, 12.5" Monkey Bars, J&M amp and speakers, HogTunes tweeter pod, lowered front end, Arnott rear suspension, Barnett clutch, and a few more accessories.
I did a light flat black paint coat on my turn signal and brake light lenses.
There is probably more but I forget.
The tuning was done at JD's Cycle by Dave Stoddart using TTS MasterTune, the bike runs flawlessly.
Here are a few pics of the process, all done in my garage.
...and the finished product...
The project started with building my home made powdercoating oven (4x4x4) and designing some kind of digital temperature control unit (the oven uses 18600 watts of oven elements and runs on two 220V outlets).
I tore down the engine and started a 124" build (DarkHorse crank, Baisley heads, SE throttle body/injectors, SE Heavy Breather with a rotation plate/spacer that I designed and had machined at the high school machine shop, SE compensator, Woods cams, Axtell cylinders/pistons, Boarzilla exhaust, etc...).
I powdercoated most of my parts flat black, a few were gloss black.
Put on some TopShop extended bags and extended fender, 12.5" Monkey Bars, J&M amp and speakers, HogTunes tweeter pod, lowered front end, Arnott rear suspension, Barnett clutch, and a few more accessories.
I did a light flat black paint coat on my turn signal and brake light lenses.
There is probably more but I forget.
The tuning was done at JD's Cycle by Dave Stoddart using TTS MasterTune, the bike runs flawlessly.
Here are a few pics of the process, all done in my garage.
...and the finished product...
Thread Starter
|
Banned
Joined: Jul 2011
Posts: 214
Likes: 0
From: Op
Well I should update some pics.
Had the frame cut and added HHI Trees and Neck, Had some paint and powdercoat done, Torch Industries Apes, Hot Licks Flamethrower kit, Nasi Ext Side Covers, Renegade Wheel. Should be ready to rock on the road next weekend.
Pic with Neck cut and Paint doing mock up
Powder Coat
Had the frame cut and added HHI Trees and Neck, Had some paint and powdercoat done, Torch Industries Apes, Hot Licks Flamethrower kit, Nasi Ext Side Covers, Renegade Wheel. Should be ready to rock on the road next weekend.
Pic with Neck cut and Paint doing mock up
Powder Coat
Bringing this back to life. Anyone else want to post up???
Former Sponsor
Joined: Aug 2005
Posts: 10,968
Likes: 54
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
