Road tech 660
Road Master
Joined: Dec 2007
Posts: 1,018
Likes: 1
From: cd. Obregon, Sonora, mx
I don't have the wiring instructions anymore, but the kit gives you the hardware to wire it into the hot lead of the cigarette lighter. No, the NIM doesn't carry power to the unit.
Seasoned HDF Member
Joined: Sep 2008
Posts: 14,205
Likes: 11,328
From: San Diego, CA
Do a google search for "-J04902.pdf" that's the 660 fairing mount kit installation, and "-J05169.pdf" is the install instructions for the navigation interface module.
I'd send them to you but I can't attach a document to a private message..
Good luck.......
I'd send them to you but I can't attach a document to a private message..
Good luck.......
Thread Starter
|
Club Member
Joined: Jun 2007
Posts: 3,435
Likes: 28
From: Living in open carry state :D
Found them. Thanks for the help. Doesn't loom too hard to wire it up.
Road Warrior
Joined: Apr 2011
Posts: 1,905
Likes: 66
From: Hartford, AL
There were some posts recently where people had wired it using the cigarette lighter for power and were blowing fuses if you plugged something into the lighter, too much load. I used the fairing mount and the instructions with it call for wiring it to the connector on the headlight wire. The cord has an inline fuse and that is how mine is wired. No problems with it
Thread
Thread Starter
Forum
Replies
Last Post
