Wild1 Chubbys bars - CRACKED !!!! Wtf !
Thread Starter
|
Banned
Joined: Mar 2011
Posts: 123
Likes: 0
From: Orange, CA
Actually really not that loud. It's got a Great sound. I would say it's my favorite bolt on part I've done to my bike.
I did have it Dyno'd a couple of months ago to program the power Commander after I installed the exhaust.
I'll have to find the sheet and post up the specs.
I did have it Dyno'd a couple of months ago to program the power Commander after I installed the exhaust.
I'll have to find the sheet and post up the specs.
That is exactly the problem. If the bars were not clamped down with enough force, the pipe takes the pain at the weakest point which is the wiring hole.
If I were building apes or mini apes, I would re enforce the area's that I compromised with the cuts.
the chrome flake seen in one pic shows that it is single layer coating & not the highest quality out there. I am going to guess that they have a supply contract with a lil Chinese guy who sells them box's full of bars & they put their company logo on them!
Don't throw them out, weld them & save them for a different bike!
Hatch.
If I were building apes or mini apes, I would re enforce the area's that I compromised with the cuts.
the chrome flake seen in one pic shows that it is single layer coating & not the highest quality out there. I am going to guess that they have a supply contract with a lil Chinese guy who sells them box's full of bars & they put their company logo on them!
Don't throw them out, weld them & save them for a different bike!
Hatch.
If a customer ever has a problem like this is is from installing incorrectly. Some of the guys on these forums know our products. They are made in California USA. We as a company do not like anything made in China. The problem these days is everything on a Harley is made in China except the engine, frame & front forks. The forks are made in Japan.
All our products are made here. Know the facts before spouting off.
John, R&D @ Wild 1.
Outstanding HDF Member
Joined: Sep 2005
Posts: 2,600
Likes: 7
From: Minnesota
I am not clear on why you threw away the one piece clamp. I'd fish it out of the trash if you can and include it in the picts to send to Wild1. Without it their first reaction will be that you used a two piece clamp no wonder they broke.
Tourer
Joined: Apr 2012
Posts: 325
Likes: 2
From: Texas
Elite HDF Member
Joined: Apr 2009
Posts: 3,542
Likes: 161
From: Booming metropolis
Chinese? I don't think so. I know this is an old thread but a customer just sent a link to it.
If a customer ever has a problem like this is is from installing incorrectly. Some of the guys on these forums know our products. They are made in California USA. We as a company do not like anything made in China. The problem these days is everything on a Harley is made in China except the engine, frame & front forks. The forks are made in Japan.
All our products are made here. Know the facts before spouting off.
John, R&D @ Wild 1.
If a customer ever has a problem like this is is from installing incorrectly. Some of the guys on these forums know our products. They are made in California USA. We as a company do not like anything made in China. The problem these days is everything on a Harley is made in China except the engine, frame & front forks. The forks are made in Japan.
All our products are made here. Know the facts before spouting off.
John, R&D @ Wild 1.
It ought to be pretty stinky if he didnt
Thread
Thread Starter
Forum
Replies
Last Post
