10" Monkey Bars.....who's got 'em ?
Thread Starter
|
Road Master
Joined: Dec 2009
Posts: 1,091
Likes: 1
From: new jersey
10" Monkey Bars.....who's got 'em ?
I'm in the middle of swapping out my inner fairing and installing 10" MBBs.... from the guys who have them... did the stock brake/clutch work or were they too short?
if they were too short where and what kind of new lines did you go with and how much did they cost?
i appreciate your help.... and by the way, nice bars
thanks boys...be well...ride safe
if they were too short where and what kind of new lines did you go with and how much did they cost?
i appreciate your help.... and by the way, nice bars
thanks boys...be well...ride safe
Outstanding HDF Member
Joined: Apr 2009
Posts: 2,371
Likes: 6
From: near Paris, France
10" for me and still stock lines (brake, clutch and throttle). When i'll change my brake lines, i'll add 2" to be able to rotate more brake lever but it work with stock length.
Cruiser
Joined: Dec 2009
Posts: 103
Likes: 0
From: Central Ohio
Went with +6 clutch and +4 on brake, Magnum black pearl from phat performance . $225.00 Dont know how anyone is using stock clutch cables, way to tight. +4 on both should work fine , i have 2010 streetglide also. Just be prepared to remove the roll pin from tripple tree that locates stock brake splitter, the Magnum is a round splitter(puck) and will not fit without removing roll pin.
Thread Starter
|
Road Master
Joined: Dec 2009
Posts: 1,091
Likes: 1
From: new jersey
Went with +6 clutch and +4 on brake, Magnum black pearl from phat performance . $225.00 Dont know how anyone is using stock clutch cables, way to tight. +4 on both should work fine , i have 2010 streetglide also. Just be prepared to remove the roll pin from tripple tree that locates stock brake splitter, the Magnum is a round splitter(puck) and will not fit without removing roll pin.
anyone care to explain????
i think this might end making me more confused?
Thread
Thread Starter
Forum
Replies
Last Post
RickK
Touring Models
5
Jun 24, 2019 08:29 PM
