I have a 2012 street glide and I trying to replace my speakers but I have run into a snag. I cannot remove the wiring plug from the headlamp element. I've read the service manual and read a couple of diy threads, I tried pulling side to side, no help. I don't see any tabs to squeeze. I'm pulling pretty hard and feel like I'm going to mess something up. What am I missing? Somebody help me.

 

It's on there pretty good & hope yours isn't corroded (shouldn't be w/2012 bike). Got to wiggle the connector kinda "circular" to break all "three" prongs loose. Take a couple of breaths & give 'er another try - good luck!

 

Squeeze the sides and pull comes right off.

 

yep squeeze it and it will come

 

Happens every time..... aaaaaaaaaaaaaa I mean the headlight

 

Yes, give it a good squeeze then gently pull it off.

 

Between some of the avatars and all this talk about "squeezing & pulling" I'm about to grab the OL & head upstairs...

 

Put a dab of Dielectric grease on it when you re-install

 

your not kiddin

 

Makes you want to smoke...