When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Anything other than just take the old battery out and put in the new one in? It is on an 09 Street Glide with Security system and i added the Radio Shack siren. Does anything have to be done pre install to security or the fob? Or do i just take one out then the new in and everything stays the same other than i have a new battery? LOL Any input appreciated
Fully charge your new one off the bike first. I recently bought a new car battery, put it on a tender and was surprised how long it took to get to fully charged. Overnight should do it. Doing that is said to give the best service life.
Make sure you have the nylon strap that assists you in lifting the battery in the middle of the battery (bottom of tray) and the loose end where you can grab it after the battery is in the tray. I didn't the last time I installed my battery and had to remove some parts to get the battery out. That thing is heavy and there's no where to grab it and pull it straight up. At least I couldn't do it....
I could not get the battery out using the strap. Used two vise grips on the terminals, which worked great. Just do not short them to the frame or anything.
I replaced the Five year old battery on my Glide about a year ago now. It didn't last too long and found the two main causes were, Shelf life and charging before installing. They didn't charge it, nor recommend I did. They did warranty it. New one is as good as gold. I did put it on the charger, as it needed it.
My 0.02
aka Bob
"unsubscribed" Lol
Last edited by Turbo Turtle; Nov 22, 2012 at 01:04 PM.
Reason: because I can
Check your manual. You don't say what model bike you have, but with the security system and TBW, there is a definite order of steps you follow before you remove the battery and steps to get everything back to nominal after the new battery is installed.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.