When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm putting done apes on my street glide and I was thinking about using solid handle bar bushings .. Is there much more vibration with them than stock rubber bushings ? Thanks !
There is a little more vibration, but it takes all the "slop" out of the bars. The pro's outweigh the cons, imo. I put solid mounts on mine. Even with the nylon bushings my bars would still move a little. So, I had a freind make me a set of alluminum ones. Mine are totally rigid. Can't see out of my mirrors at an idle but my bars don't move.
I have the Polly bushings on my 14s. My bars still move a little bit when il you pull on them. It's too much work to replace them with something else so...... I'm fine with it.
No, not that i've noticed, but at a stop light my bars dance so much my levers rattle. My Superglide shakes alot at idle, (dealer says, "it's a Superglide, It's supposed to shake."), But with the rigid bushings and 18" apes, my mirrors are useless at a stop. They smooth out right off idle. No numbing of hands or anything. I had the Neophrene, or nylon or whatever you call them,(hard plastic),but my bars still moved. With the aluminun they are solid as a rock.
Yup, what Kojak said, and tighten the hell outta them.
Bars will be plenty stiff and u can still see in mirrors and hands wont get sleepy...
Son at the speeds I roll at, there's no sleepy, to much adrenaline in the system!. 64 yo rider, 07 Stree Glide, SE Heavy Breather A/I, dual TAB BAM Stick slip on's, PV3/with Autotune Pro, Wood 222-6 cams, 107 big bore with high output heads on the way PEACE
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.