Chubby bars
Thread Starter
|
Tourer
Joined: Sep 2012
Posts: 321
Likes: 0
From: st. pete fl
the wiring went fine except i put one connector together backwards! i knew it was wrong and i checked out the main harness and had to change it back, i just laughed my a$$ off and thought, we do it nice cause we do it twice!! if all goes well tomorrow, exhaust goes back on, bars go on and reflash the ECM then start V-tuning her!
Thread Starter
|
Tourer
Joined: Sep 2012
Posts: 321
Likes: 0
From: st. pete fl
well the bike started right up! has a nice lope to it now. all parts are back on and look great. I did have 2 wires crossed still, but changed them out. now everthing works right, all wire are hidden on bars and fog lights are wired through the crash bar. I will start v-tuning it tomorrow. now i just have to figure out how to post pictures on here!
Tourer
Joined: Aug 2012
Posts: 330
Likes: 16
From: Colorado
well the bike started right up! has a nice lope to it now. all parts are back on and look great. I did have 2 wires crossed still, but changed them out. now everthing works right, all wire are hidden on bars and fog lights are wired through the crash bar. I will start v-tuning it tomorrow. now i just have to figure out how to post pictures on here!
Thread
Thread Starter
Forum
Replies
Last Post
Powertrip240
2014-2024 Touring Models
27
Mar 16, 2016 07:38 PM
