P0505 IAC code
Thread Starter
|
Cruiser
Joined: Feb 2008
Posts: 175
Likes: 1
From:
P0505 IAC code
So here's the run down I took my bike apart it's a 2009 street glide with a 103 kit in it
I decided to have the heads cnc ported and polished sent them to s&s I also installed s&s 585 ez start cams adjustable pushrods roller rockers lifters etc. assembled everything back together started the bike and it is running really rich and the idle fluctuates
It's turning check engine light on and I'm getting the p0505 code
Checked for intake leaks and went over everything again
I'm using a power commander v with auto tune
The only thing I can think of is that when the previous owner had the 103 kit installed they put the screaming eagle tuner on it and now it's getting way to much fuel but I don't have software for the screaming eagle tuner
Any suggestions? I'm ready to pull my hair out
Thanks
Joe
I decided to have the heads cnc ported and polished sent them to s&s I also installed s&s 585 ez start cams adjustable pushrods roller rockers lifters etc. assembled everything back together started the bike and it is running really rich and the idle fluctuates
It's turning check engine light on and I'm getting the p0505 code
Checked for intake leaks and went over everything again
I'm using a power commander v with auto tune
The only thing I can think of is that when the previous owner had the 103 kit installed they put the screaming eagle tuner on it and now it's getting way to much fuel but I don't have software for the screaming eagle tuner
Any suggestions? I'm ready to pull my hair out
Thanks
Joe
Tourer
Joined: Jul 2011
Posts: 453
Likes: 3
From: N. Illinois
start with cleaning your throttle body intake/IAC with MAF cleaner or similar electronics friendly cleaner. similar idle issues are common due to a dirty (oil) IAC but never heard of it setting a check engine light.
Thread
Thread Starter
Forum
Replies
Last Post
