2" Pullbacks

Reply Subscribe

Thread Tools

Search this Thread

Jul 19, 2013 | 10:35 AM

gll

Thread Starter

Advanced

Joined: Dec 2010

Posts: 66

Likes: 0

From: North Texas

2" Pullbacks

Question for the guys that changed to the 2" HD pullbacks and did not change the clutch cable. How did you reroute it? I am changing my stock bars and would appreciate any info.

Jul 19, 2013 | 04:35 PM

rebbe18

Road Captain

Joined: Aug 2006

Posts: 514

Likes: 13

From: North of the 49th parallel (Canada)

Instead of bringing the cable through the hole in the inner fairing, you would route it up between the inner fairing and the gas tank.
Changes the look but if you are ok with how it looks, that's how to do it.

Jul 19, 2013 | 05:03 PM

gll

Thread Starter

Advanced

Joined: Dec 2010

Posts: 66

Likes: 0

From: North Texas

Thank you. That is what I was thinking but wanted to double check.

I will try it like that and give the bars a try out going to Sturgis. If I like them I will do a longer cable

Thanks again

Jul 19, 2013 | 08:41 PM

karbar99

Club Member

Joined: Aug 2008

Posts: 479

Likes: 1

From: In the flatlands!

Quote:

Originally Posted by gll

Thank you. That is what I was thinking but wanted to double check.

I will try it like that and give the bars a try out going to Sturgis. If I like them I will do a longer cable

Thanks again

I replaced my cable with a 3+ black cable from harley. The cost was less than $35 shipped. If you should decide to do this I can give you an old stock number which some online dealers still have in stock.

Jul 19, 2013 | 09:54 PM

BackRoader

Road Master

Joined: May 2008

Posts: 1,096

Likes: 107

From: Joplin, MO

The original cable path is around the front and over the top of your stereo. Re-route the cable under it and out the original hole. Gives you a few extra inches.

Jul 20, 2013 | 01:11 AM

mike5511

Elite HDF Member

Joined: Jun 2007

Posts: 3,873

Likes: 13

From: NW Arkansas

Quote:

Originally Posted by karbar99

How about just posting it right here?

Jul 20, 2013 | 06:40 AM

gll

Thread Starter

Advanced

Joined: Dec 2010

Posts: 66

Likes: 0

From: North Texas

Thanks for the replies. I am going to get started on the swap in just a few minutes. Really hope it helps on the tendinitis in the elbow

Trending Topics

1979 XLH 1000 - a good year?

111

2.6k
FLT to FLHS

22

469
Top end rebuild Go Big or Stay Home?

97

3.6k
What would cause this Front Tire failure?

22

922
Oil pressure sensor 2002 Heritage Classic

22

453

Jul 20, 2013 | 04:08 PM

karbar99

Club Member

Joined: Aug 2008

Posts: 479

Likes: 1

From: In the flatlands!

Quote:

Originally Posted by mike5511

How about just posting it right here?

I would have but he was asking how to reroute the stock cable and I was only putting out there that I replaced mine with a 3+ stock harley black cable, not wanting to hijack the thread with what I done and if he should so decide to do this as well.
So, here it is to those that may want the information for future references.
This part number has been listed in many post's in the past as well if you do a search here.
NOP #38649-08
As I stated earlier a few select dealers or online vendors may still have this part in their NOP's.
Check with your local dealer and have them look it up in their h-d net.com, "parts locator".
All's well.