Tour Pak Light Connector

Reply Subscribe

Thread Tools

Search this Thread

Jul 21, 2013 | 05:15 PM

jaycanter

Thread Starter

Intermediate

Joined: Apr 2012

Posts: 44

Likes: 0

From: mi

Tour Pak Wrap Around Led Light Connector Help

I got a 12 SG and added a tourpak just finished adding the led wrap around kit from harley and have spent the last 3hrs going thru the service manual and looking all over the bike and can't find where to plug in the connector. it comes with a y connector but is a differant style plug than whats on the bike do i need another harness? the connector looks like the ones in the front faring not under the seat or sides.

Thanks
Jay

Last edited by jaycanter; Jul 21, 2013 at 09:11 PM.

Jul 21, 2013 | 06:31 PM

shield

Advanced

Joined: Apr 2009

Posts: 60

Likes: 0

From: Maryland

I cant help, but I'd like to see some pics when you get it on and lit up. Thanks.

Jul 21, 2013 | 09:13 PM

jaycanter

Thread Starter

Intermediate

Joined: Apr 2012

Posts: 44

Likes: 0

From: mi

Hopefully somebodys knows if not i'll have to do some exploring the wiring to connect myself. when done i'll post some pics

Jul 21, 2013 | 09:15 PM

C.H.L.

Road Warrior

Joined: Feb 2010

Posts: 1,953

Likes: 28

From: Houston, TX

Subscribed..... Maybe for nothing. RK is probably different

Jul 21, 2013 | 10:16 PM

Cep10SG

Tourer

Joined: Jul 2011

Posts: 267

Likes: 4

From: Jacksonville, NC

You might have to do what I did, I didn't feel like donating my money to the stealership after I also added the CVO wrap around lights to my chopped pack. so I made my own harness to connect it all. There is a plug on the left hand side panel, that'll run the brake lights (only). and yes, there is also a plug the runs on the left side that goes to the lights. I chose to make my connection through the Tribar light circuit to get it working the way I wanted it to. I'm pretty sure there are many ways, I just chose to do it that way to make my turn signals and hazards work. I put my school "edjumacation" to good use. I think I put a PDF together somewhere on my computer on "how to" but I'll have to dig for it. I'll try to upload a pic tomorrow of my lights.

Cep

Jul 22, 2013 | 06:38 AM

ghanu

Advanced

Joined: Jan 2006

Posts: 70

Likes: 5

I installed the same light kit on a king tour pack on my '13 SG with a wiring harness adapter from http://www.ridetimetechnology.com/. Simple plug in harness.

Gary

Jul 22, 2013 | 08:27 AM

ghanu

Advanced

Joined: Jan 2006

Posts: 70

Likes: 5

I just found my receipt from Ride Time Technology, the part number is RTQC-2SR-SP4. I don't think it was listed on their website. It is a Y harness that taps into the rear light harness near the fuse block and places the correct connector under the seat to plug in the tour pack LED light bar.

Gary