2014 Part number needed
Thread Starter
|
Cruiser
Joined: Jul 2012
Posts: 183
Likes: 3
From: SD
2014 Part number needed
On my 2009 FLHTCU I wired in a 12V garage door opener to the Acc switch to the right of the ignition switch. I'd like to do the same on my 2014 FLHXS. I need to get a switch panel to the left or right of the ignition switch. Do all 6 switches go back to the Accessory Connector under the left side cover? Do I just order a switch panel and I get all the buttons? My local dealer is not sure on this. I've included a picture of the switches to the left and right of the ignition switch and the accessory connector.
Thanks.
Thanks.
Club Member
Joined: Jun 2007
Posts: 45,429
Likes: 2,898
From: Bedford UK
The problem with such a new bike is getting detailed info like that! It would be worth seeing if you can get hold of the factory service and parts manuals, which between them should help answer your question, if nobody else does.
Seasoned HDF Member
Joined: Jun 2006
Posts: 28,552
Likes: 3,954
From: Vermont
You don't buy a switch assembly and receive all 6 switches, nor do they all go to the accessory plug. I would look at pn#69200172 or 69200173. By the way, the 14's are on the microfiche's now.
Seasoned HDF Member
Joined: Jan 2007
Posts: 20,616
Likes: 4,440
From: anacoco, la
ronnie's doesn't have the 14s loaded yet. heck they don't even have the 13s loaded. but this one does:
http://www.granitestateharleystore.c...partfinder.htm
http://www.granitestateharleystore.c...partfinder.htm
Thread
Thread Starter
Forum
Replies
Last Post
BaggerBill103
Dyna Glide Models
8
Sep 4, 2019 08:11 AM
