Saving Map with Power Vision

Reply Subscribe

Thread Tools

Search this Thread

Sep 24, 2013 | 12:51 PM

mhud

Thread Starter

Road Captain

Joined: Sep 2007

Posts: 714

Likes: 0

From: Western,NC

Saving Map with Power Vision

After you make a run with Auto Tune do you keep your bike running before you exit the data log. I've been cutting mine off first which does not allow the chance to exit data log. I'm looking to insure I/m saving the new map correctly. Thanks Guys.

Sep 24, 2013 | 12:53 PM

'05Train

Ultimate HDF Member

Joined: May 2008

Posts: 7,439

Likes: 884

From: 'Noke, VA

I leave it running.

Sep 24, 2013 | 01:11 PM

JustDennis

Road Warrior

Joined: Jan 2008

Posts: 1,549

Likes: 18

From: Upstate SC

Quote:

Originally Posted by mhud

You must exit the data log before turning off the bike.

Sep 24, 2013 | 02:57 PM

skratch

Seasoned HDF Member

Joined: Jan 2007

Posts: 20,616

Likes: 4,440

From: anacoco, la

i've done this a couple times. so don't make the same mistake as me. export the learned values before you exit datalog or you lose everything

Sep 24, 2013 | 03:44 PM

fuelmoto

Platinum Sponsor

Joined: Feb 2007

Posts: 7,286

Likes: 4,281

From: Little Chute, WI

Actually as of quite a while ago logs and Auto Tune corrections are automatically saved every 30 seconds, so if you shut the bike off before you end your logs you are still ok. Just to be safe run the update client and make sure your firmware is up to date.

__________________