2011 Street
Thread Starter
|
6th Gear
Joined: Mar 2013
Posts: 11
Likes: 0
From: Atlanta
2011 Street
I would like a suggestion on the best heads to go with the upgrades that I've a already done. All suggestions are appreciated.
All work was done by my local Harley Dealer.
Woods 777 cam
Screamin' Eagle Adjustable Push Rods/lifters
Valve Springs
Harley Super Tuner
Screamin' Eagle Heavy Breather Kit
(All necessary gaskets, seals, and O-rings for the above install were done)
2 into 1 Fat Cat exhaust
All work was done by my local Harley Dealer.
Woods 777 cam
Screamin' Eagle Adjustable Push Rods/lifters
Valve Springs
Harley Super Tuner
Screamin' Eagle Heavy Breather Kit
(All necessary gaskets, seals, and O-rings for the above install were done)
2 into 1 Fat Cat exhaust
Last edited by jlmillsjr; Feb 5, 2014 at 05:48 PM.
Advanced
Joined: Nov 2011
Posts: 57
Likes: 0
From: Kaufman TX
I have T-Man and have been very happy with mine. I looked at S&S, and a number of others and the T-Man's had the best looking machine work and flowed more CFM's on a flow bench my Indy was using to compare
My 2 cents
Good luck
My 2 cents
Good luck
Ultimate HDF Member
Joined: Mar 2012
Posts: 6,129
Likes: 143
From: Santa Cruz
There are a few builders here that can set up your heads for your build. Give a few head guys a call and pick the one ya feel good about. That is the way to do it. One size does not fit all.
Thread
Thread Starter
Forum
Replies
Last Post
