When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2007 FLHX....... went to crank ..... My battery isshot !!!!
Started pulling everything off to get to it... Disconnected rear speakers... removed the Tour-Pak... THEN IT HIT ME.
I have NO IDEA how to remove my driver's backrest -----
What an idiot I feel like asking this question.
I am assuming there is some sort of qucik release that must be pushed or pulled??
i squeeze the 2 sides together and pull up. it's a little tough to squeeze, but it will come out. You may have to repeat if you don't hold on the the backrest until it's completely out. putting in is a trick too if you want it in one of the 2 lower positions; gotta squeeze or push hard on one side.
not busting on you....the stupid questions are the ones not asked then trar somthing up in the process....but I wish this forum would allow more postings on the DIY section for simple things like this. I was talking to a co-worker yesterday on a similar topic. Many people are not very mechanically minded...not saying we all can rebuild a crb in our sleep, but for the soetime simple things that are just a pain to figure out.
Funny how stuff likes this pops up. Just put a rider backrest on mine. Knew it was spring-loaded and I'd have to squeeze it to get it up (did that last night), but it's still fun to read this morning was something you were screwing with last night.
What I didn't realize by having the backrest on was how forward that moved me. Apparently, I've been laying back on the seat more than I would have realized.
Rear speakers on FLHX? Do you have the Ultra Classicstyle speakers or a different setup?
ORIGINAL: DJVOLUME
2007 FLHX....... went to crank ..... My battery isshot !!!!
Started pulling everything off to get to it... Disconnected rear speakers... removed the Tour-Pak... THEN IT HIT ME.
I have NO IDEA how to remove my driver's backrest -----
What an idiot I feel like asking this question.
I am assuming there is some sort of qucik release that must be pushed or pulled??
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.