Well crap !!!
Thread Starter
|
Road Warrior
Joined: Jul 2007
Posts: 1,362
Likes: 13
From: georgetown ky
Well crap !!!
I got out yesterday and rode about 200 miles did my honey do's around the house my son in laws ultra was filthy and we put it on the rack and began giving it a good cleaning.
Then it was my new limiteds turn. I got on the back wheel as I turned it.Yes It was in Nuetral, It stopped after 1/2 revolution. I then rolled the wheel forward, I finished the cleaning the entire bike I got it off the rack and with the weight SNAP I figure WTF. anbolt goes skipping across the floor. but the wheel was ffreed up I put the bike back on the lift pull the bags back off and looked the whole thing over for where the bolt came from.
To no avail.No empty holes. The good news is the wheel rolls freely. I bet H-D will find where it goes. Any Ideas?
I found another problem but don't fit this section.
Then it was my new limiteds turn. I got on the back wheel as I turned it.Yes It was in Nuetral, It stopped after 1/2 revolution. I then rolled the wheel forward, I finished the cleaning the entire bike I got it off the rack and with the weight SNAP I figure WTF. anbolt goes skipping across the floor. but the wheel was ffreed up I put the bike back on the lift pull the bags back off and looked the whole thing over for where the bolt came from.
To no avail.No empty holes. The good news is the wheel rolls freely. I bet H-D will find where it goes. Any Ideas?
I found another problem but don't fit this section.
Thread
Thread Starter
Forum
Replies
Last Post
