Harley Davidson Forums
The female port is for the fluid coming out of the abs module, and obviously the other two are caliper lines.
The female port is for the fluid coming out of the abs module, and obviously the other two are caliper lines.
0 2017/07/18 11:42:32
The female port here is the fluid supply to the abs module, and the male end is where the master cylinder line goes.
The female port here is the fluid supply to the abs module, and the male end is where the master cylinder line goes.
0 2017/07/18 11:42:38
This is what they sent me and told me this is what I should have received. It's also the pic on the website so since it showed a one piece design, it threw me off to receive a two piece design.
This is what they sent me and told me this is what I should have received. It's also the pic on the website so since it showed a one piece design, it threw me off to receive a two piece design.
0 2017/07/18 11:42:39
0 2017/07/18 11:46:44
0 2017/07/18 11:46:49
0 2017/07/18 11:48:51
0 2017/07/18 11:48:53
0 2017/07/24 05:35:22
0 2017/07/24 05:35:27
0 2017/07/25 11:29:34
0 2017/07/25 11:29:37
0 2017/07/27 18:30:39
0 2017/07/28 13:01:55
0 2017/07/28 13:02:05
0 2017/07/29 19:12:28
0 2017/07/29 19:14:37
0 2017/08/08 18:56:31
0 2017/08/08 18:57:53
Don't mind the brake line....ordered one way too long, now I'm waiting for my replacement.
Don't mind the brake line....ordered one way too long, now I'm waiting for my replacement.
0 2017/08/15 07:19:10
This was taken from the right side of the bike, looking into the lip on the bottom of the tank on the left side.
This was taken from the right side of the bike, looking into the lip on the bottom of the tank on the left side.
0 2017/08/21 06:54:00
Same thing only this is the right side of the tank taken from the left side.
Same thing only this is the right side of the tank taken from the left side.
0 2017/08/21 06:54:03
Ave also installed two 6 inch strips under the battery box and fuse box on a street Bob. That customer wanted them everywhere but in my opinion it was just too much and it kind of reminded me of one of those fast and furious jap burner cars. He also wanted em under the fender, swing arms, and frame. It was overkill times 10. At least in my opinion.
Ave also installed two 6 inch strips under the battery box and fuse box on a street Bob. That customer wanted them everywhere but in my opinion it was just too much and it kind of reminded me of one of those fast and furious jap burner cars. He also wanted em under the fender, swing arms, and frame. It was overkill times 10. At least in my opinion.
0 2017/08/21 06:54:08
0 2017/08/21 06:54:11
Another shitty pic but here's my fiancés bike on the left, my old street Bob in the middle and my buddy's sportster all the way to the right. I installed them under the tanks directly to the accessory plug. Very easy and only takes about 15 minutes.
Another shitty pic but here's my fiancés bike on the left, my old street Bob in the middle and my buddy's sportster all the way to the right. I installed them under the tanks directly to the accessory plug. Very easy and only takes about 15 minutes.
0 2017/08/21 07:11:12
Before
Before
0 2017/08/31 05:40:32
After
After
0 2017/08/31 05:40:37
I did have to extend the fuel line but it still rubs against the frame at the ends.
I did have to extend the fuel line but it still rubs against the frame at the ends.
0 2017/08/31 05:40:42
If you look at the wiring and vent tube, it sits so if I turn the bars all the way to the left like I would when I stop somewhere, it will be smashed by the triple tree. I'm gonna see if I can extend the vent tube and pull more of the wiring harness out so I can run it over the tank lift. If I leave it like this it will eventually start to chaff the wires as well as restrict the vent hose
If you look at the wiring and vent tube, it sits so if I turn the bars all the way to the left like I would when I stop somewhere, it will be smashed by the triple tree. I'm gonna see if I can extend the vent tube and pull more of the wiring harness out so I can run it over the tank lift. If I leave it like this it will eventually start to chaff the wires as well as restrict the vent hose
0 2017/08/31 05:40:45
Is this what you meant?
Is this what you meant?
0 2017/09/05 11:09:47
0 2017/09/14 12:08:17
0 2017/09/18 11:09:16
0 2017/09/18 11:09:19
0 2017/09/18 11:09:22
0 2017/09/19 18:08:42
Note the new position of the gages after the lift...I like it.
Note the new position of the gages after the lift...I like it.
0 2017/09/19 18:09:16
0 2017/09/27 06:49:48
0 2017/09/27 06:50:35
0 2017/09/27 18:26:22
0 2017/09/27 18:28:36
0 2017/10/03 12:07:09
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands