chrome fork sliders
Hope this helps
Todd
[IMG]local://upfiles/14649/13276F1CAD59490DAB85C7A015DE69F0.jpg[/IMG]
Trending Topics
ok, one more question. i read the link about the sliders on the fat boy but my question is how hard is it to do them on a wideglide?
special tools, how do you deal with the springs etc........!
my mechanical ability is pretty good! but, i just wanted to ask guys who have done it before!!
Fine threads on the caps, so be real careful during the reassembly.
Special tools -
.......6 mm long reach allen wrench (05 back Dynas and vRods).
Gotta reach in about 2 inches.
The 06 and up Dynas use a 12mm allen head.
I made one by cutting off anL shaped wrench
and inserting this into a 12mm deep socket.
......1/2 drive impact wrench for the 12mm bolt into the oil lock.
Had to hammer on mine REAL hard.
Some folks say their's comes out real easy.
.......rig up a holding fixture. picture of my rig below.
Last picture shows PVC for driving in the seals.
Forgot to snap a shot, so this picture shows the after assembly.
........Like conley said, service manual is a must.
.......Order the seals and such ahead of time so you have everything on hand.
mud




The Best of Harley-Davidson for Lifelong Riders
Sliders are cool, but withsome elbow grease you can get the stock ones looking just as good.....just a thought.



