Dyna Crew ...


Seems there's always a few threads up on bar changes, cables, brake lines, etc ... I thought it might be a good idea if we all post here with the info we have on our set-ups. At your conveience ... post the bars you've installed and all others parts, part #'s, and mods that were needed to get the job done. Maybe we can all save each other some time better spent wrenching and riding.


Thanks all ....

PsTaN

 

A step-by-step on internal wiring would be great...

 

06 FXDBI Street Bob -w- Street Slammer Bars
[ul][*] Street Slammer Bar - #56391-04[*] Clutch Cable Black - Stock 06 FXDI #38765-06[*] Throttle/Idle Cables - Stock 06 FXDBI[*] Brake Lines - Diamond Back #46654-06[*]Clutch Cable Guide Kit - NOT NEEDED
[/ul]

Note: Street Slammer Bars will fit with existing cables on FXDIs the HD book says NA due to the gauge mounting - mount the gauges some other way, and your FXDI cables will be fine.

 

Thanks guys ... let's keep the info flowing!!


PsTaN

 

06 FXDBI Street Bob w/ 16" Nash Motorcycle Gimp Hangers

just ordered all this

-Nash Motorcycle 16" Gimp Hangers ($175) - www.nashmotorcycle.com
-Barnett Black Clutch Cable +6 over ($50) - #BA-789-06+6
-Barnett Black Brake Line +6 over ($75) - #HD0073-1FCH/BL+6
-Barnett Black Throttle Cable +6 over ($18) - #BA-343-96+6
-Barnett Black Idle Cable +6 over ($18) - #BA-342-96+6
-Long Beach Sindicate Wiring Harness Extensions ($20) - Long Beach Sindicate (562)572-7405

 

This is a good thread, lets keep this one at the top!

 

Oh dam, now I will have some info on another thing I want to do! That is not good, but it is. Just means that the excuse I was telling myself that I do not know what to get is out the window!! Keep em coming!! To cool

 

any suggestions what I can do to my Streetbob? I would like to have about 3 more inches over the factory ape hangers. Anyone can reccomend what I can buy and what I will need?

 

Yep. Pick up the Wild One Chubby 12.5 Apes. It'll get you 2.5 higher and a bit wider as well. You'll need new cables and lines. I extended my harness, although some say you can dig more out of the frame tube. I didn't see enough slack. When I'm finished with the install (long story), I'll be as specific as possible. In the meantime, check out these two links for internal wiring and a complete ape install (w/pics) on a Road King:

Handlebar Wiring
Apes Install From Start To Finish

Whiff

 

...am glad this thread is going over well. Soon we should have a wealth of info for all of us to use when we are considering a bar change.


Thanks to all ...

PsTaN