Torque Wrench Suggestions
Thread Starter
|
Banned
Joined: May 2005
Posts: 14,496
Likes: 156
From:
Torque Wrench Suggestions
I've seen a few people asking which torque wrench would be suggested for working on my bike, this information may be of help to some, they are sears units and a good value for the dollar.
Here's what I have
TOOL # 8000733592- 1/2 inch drive- 25-250 FOOT lbs- $109.99- MODEL #944597 Digital unit, real nice to work with.
Tool # 4030681248- 3/8 inch drive-20-150 FOOT lbs. - $74.99- MODEL #944595
Both made by craftsman, good units, both are the clicker types
Tool- 3/8 inch drive- 25-250 INCH pounds- $74.99 -Model #944593
Don't forget to get the case to protect them.
If you need inch pounds , there are 12 Inch pounds in 1 foot pound.
Also the #27 torx bit usually does not come in the sets and must be purchased seperately, but is used very much on the harleys. Don't make the mistake of using a #25 torx as it will only strip out the bolt heads
Here's what I have
TOOL # 8000733592- 1/2 inch drive- 25-250 FOOT lbs- $109.99- MODEL #944597 Digital unit, real nice to work with.
Tool # 4030681248- 3/8 inch drive-20-150 FOOT lbs. - $74.99- MODEL #944595
Both made by craftsman, good units, both are the clicker types
Tool- 3/8 inch drive- 25-250 INCH pounds- $74.99 -Model #944593
Don't forget to get the case to protect them.
If you need inch pounds , there are 12 Inch pounds in 1 foot pound.
Also the #27 torx bit usually does not come in the sets and must be purchased seperately, but is used very much on the harleys. Don't make the mistake of using a #25 torx as it will only strip out the bolt heads
Thread
Thread Starter
Forum
Replies
Last Post
trozenhorse
Softail Models
12
Dec 1, 2009 02:05 PM
