Tappet Lifters: Feuling HP+ or H-D ?

Reply Subscribe

Thread Tools

Search this Thread

Feb 20, 2010 | 02:17 PM

troop

Thread Starter

Outstanding HDF Member

Joined: Oct 2009

Posts: 2,870

Likes: 49

From: Stoughton, WI

Tappet Lifters: Feuling HP+ or H-D ?

My local dealer says the H-D tappet set is $125 (w/tax. no 20% on this item). I see Feuling HP+ lifters going for approx the same cost. Is the quality any better in the Feuling's ? Thanks for any info .....

Feb 20, 2010 | 05:44 PM

Bad Disposition

Tourer

Joined: Jan 2009

Posts: 277

Likes: 0

From: I'm nation wide

Tappet Lifters: Feuling V HD

I've been running the Feuling lifters for a while now, and prefer them. Better safe than sorry.

Feb 20, 2010 | 06:51 PM

2005UltraNC

Road Master

Joined: Jan 2006

Posts: 1,200

Likes: 1

From:

I'm put a Fueling set in my 05 Ultra - 95" upgrade. Been like 20K miles so far.

Feb 20, 2010 | 08:21 PM

prodrag1320

Banned

Joined: Sep 2009

Posts: 3,569

Likes: 624

From: deland,florida

always have had very good results useing the fuelling units

Feb 20, 2010 | 10:57 PM

mtclassic

Outstanding HDF Member

Joined: Oct 2007

Posts: 3,437

Likes: 15

I have used stock and feuling hp+ and never had a problem with stock lifters. when I got about 15000 miles on the feulings they begin to bleed down really bad and clattered for a minute on every start up. Changed back to stock lifters and no clatters for the last 50000 miles. Physically they look very much the same.

Feb 20, 2010 | 11:21 PM

Tn.Heritage

Grand HDF Member

Joined: Nov 2004

Posts: 3,917

Likes: 184

From:

Went through 2 sets of fuelings, 1st set went bad after 5000 miles and drag made them up, 2nd set around 7000 miles, both sets started to bleed down, hd lifters back in this time very quiet, very happy so far.

Feb 21, 2010 | 08:03 PM

Kingofcubes

Road Master

Joined: May 2007

Posts: 851

Likes: 5

From: Mitchellville, Ia.

Have had the best luck with the factory B lifters until recently. Had a axle come loose and score a lifter bore. I'm trying R&R lifters now. Supposed to have a better metering plate in them. A little less money also.