Feb 18, 2015, 01:45 PM
Last edit by: IB Advertising
Software Update 1.18.3
Updates:
• Added capability to view information about a point of Interest, H-D dealership, recent destination, saved destination, home, or XM fuel price station while in a current route
• Added capability to cancel "Next Waypoint"
• Increased waypoints to 100
• Fixed automatic screen brightness
• Fixed map zoom level
• Performance and stability enhancements
Read further along to find out update bugs and fixes
Updates:
• Added capability to view information about a point of Interest, H-D dealership, recent destination, saved destination, home, or XM fuel price station while in a current route
• Added capability to cancel "Next Waypoint"
• Increased waypoints to 100
• Fixed automatic screen brightness
• Fixed map zoom level
• Performance and stability enhancements
Read further along to find out update bugs and fixes
Software Update 1.18.3
Hey, another thing I noticed today with the lights while in accessory position. If you hit either the front or rear brake, the front running lights/turn signals and the front fender tip light comes on as well and the rear brake lights.
Just thought it was interesting.
Just thought it was interesting.
Road Warrior
Joined: Jul 2013
Posts: 1,624
Likes: 13
From: Fort Worth
It resets everything back to defaults.
To enter the Service Menu:
1) Turn ignition off for 15 seconds
2) Press and hold power and mute button while turning ignition to accessory.
3) Continue to press for 2 seconds after warning screen is displayed.
4) Release power and mute button and accept the warning
The Service Menu will display the following options:
1) DTCS
2) Audio a) EG (serves no purpose) b) Speaker test(s)
3) Display (test the LCD display brightness and color consistency)
4) Key input (test the face plate hard keys, handlebar switches, and passenger controls)
4) Component menus (XM and Digital Audio Radio Service)
a) Module version-displays the XM versions
b) Subscription info
c) Signal status
d) XM antenna state (unsupported, detected, not detected, short, and unknown)
e) Tone generation (allows for generating left or right audio tone generated by the xm module)
f) Navigation setting (no diagnostic value)
g) GPS status (displays a graphical representation of GPS satellite position&signal strength)
H) Tuner-displays the current frequency, signal strength, RDS/RBDS info for each tuner.
I) Compass indicates current direction
5) Version information (sub menus show navigation and database versions but offer no diagnostic help.
6) Reset
a) Precalibration reset - Restores factory settings and recommended when there are no problems or DTCS
b) Post calibration save - Archives customer settings after post calibration reset
c) Post calibration reset - Resets radio default settings and restores customer data stored in post calibration save
d) Privacy reset - Clears customer data
7) Touchscreen Calibration
To enter the Service Menu:
1) Turn ignition off for 15 seconds
2) Press and hold power and mute button while turning ignition to accessory.
3) Continue to press for 2 seconds after warning screen is displayed.
4) Release power and mute button and accept the warning
The Service Menu will display the following options:
1) DTCS
2) Audio a) EG (serves no purpose) b) Speaker test(s)
3) Display (test the LCD display brightness and color consistency)
4) Key input (test the face plate hard keys, handlebar switches, and passenger controls)
4) Component menus (XM and Digital Audio Radio Service)
a) Module version-displays the XM versions
b) Subscription info
c) Signal status
d) XM antenna state (unsupported, detected, not detected, short, and unknown)
e) Tone generation (allows for generating left or right audio tone generated by the xm module)
f) Navigation setting (no diagnostic value)
g) GPS status (displays a graphical representation of GPS satellite position&signal strength)
H) Tuner-displays the current frequency, signal strength, RDS/RBDS info for each tuner.
I) Compass indicates current direction
5) Version information (sub menus show navigation and database versions but offer no diagnostic help.
6) Reset
a) Precalibration reset - Restores factory settings and recommended when there are no problems or DTCS
b) Post calibration save - Archives customer settings after post calibration reset
c) Post calibration reset - Resets radio default settings and restores customer data stored in post calibration save
d) Privacy reset - Clears customer data
7) Touchscreen Calibration
It resets everything back to defaults.
To enter the Service Menu:
1) Turn ignition off for 15 seconds
2) Press and hold power and mute button while turning ignition to accessory.
3) Continue to press for 2 seconds after warning screen is displayed.
4) Release power and mute button and accept the warning
The Service Menu will display the following options:
1) DTCS
2) Audio a) EG (serves no purpose) b) Speaker test(s)
3) Display (test the LCD display brightness and color consistency)
4) Key input (test the face plate hard keys, handlebar switches, and passenger controls)
4) Component menus (XM and Digital Audio Radio Service)
a) Module version-displays the XM versions
b) Subscription info
c) Signal status
d) XM antenna state (unsupported, detected, not detected, short, and unknown)
e) Tone generation (allows for generating left or right audio tone generated by the xm module)
f) Navigation setting (no diagnostic value)
g) GPS status (displays a graphical representation of GPS satellite position&signal strength)
H) Tuner-displays the current frequency, signal strength, RDS/RBDS info for each tuner.
I) Compass indicates current direction
5) Version information (sub menus show navigation and database versions but offer no diagnostic help.
6) Reset
a) Precalibration reset - Restores factory settings and recommended when there are no problems or DTCS
b) Post calibration save - Archives customer settings after post calibration reset
c) Post calibration reset - Resets radio default settings and restores customer data stored in post calibration save
d) Privacy reset - Clears customer data
7) Touchscreen Calibration
To enter the Service Menu:
1) Turn ignition off for 15 seconds
2) Press and hold power and mute button while turning ignition to accessory.
3) Continue to press for 2 seconds after warning screen is displayed.
4) Release power and mute button and accept the warning
The Service Menu will display the following options:
1) DTCS
2) Audio a) EG (serves no purpose) b) Speaker test(s)
3) Display (test the LCD display brightness and color consistency)
4) Key input (test the face plate hard keys, handlebar switches, and passenger controls)
4) Component menus (XM and Digital Audio Radio Service)
a) Module version-displays the XM versions
b) Subscription info
c) Signal status
d) XM antenna state (unsupported, detected, not detected, short, and unknown)
e) Tone generation (allows for generating left or right audio tone generated by the xm module)
f) Navigation setting (no diagnostic value)
g) GPS status (displays a graphical representation of GPS satellite position&signal strength)
H) Tuner-displays the current frequency, signal strength, RDS/RBDS info for each tuner.
I) Compass indicates current direction
5) Version information (sub menus show navigation and database versions but offer no diagnostic help.
6) Reset
a) Precalibration reset - Restores factory settings and recommended when there are no problems or DTCS
b) Post calibration save - Archives customer settings after post calibration reset
c) Post calibration reset - Resets radio default settings and restores customer data stored in post calibration save
d) Privacy reset - Clears customer data
7) Touchscreen Calibration
Cruiser
Joined: Aug 2012
Posts: 169
Likes: 39
From: Peoria, IL
It resets everything back to defaults.
To enter the Service Menu:
1) Turn ignition off for 15 seconds
2) Press and hold power and mute button while turning ignition to accessory.
3) Continue to press for 2 seconds after warning screen is displayed.
4) Release power and mute button and accept the warning
The Service Menu will display the following options:
1) DTCS
2) Audio a) EG (serves no purpose) b) Speaker test(s)
3) Display (test the LCD display brightness and color consistency)
4) Key input (test the face plate hard keys, handlebar switches, and passenger controls)
4) Component menus (XM and Digital Audio Radio Service)
a) Module version-displays the XM versions
b) Subscription info
c) Signal status
d) XM antenna state (unsupported, detected, not detected, short, and unknown)
e) Tone generation (allows for generating left or right audio tone generated by the xm module)
f) Navigation setting (no diagnostic value)
g) GPS status (displays a graphical representation of GPS satellite position&signal strength)
H) Tuner-displays the current frequency, signal strength, RDS/RBDS info for each tuner.
I) Compass indicates current direction
5) Version information (sub menus show navigation and database versions but offer no diagnostic help.
6) Reset
a) Precalibration reset - Restores factory settings and recommended when there are no problems or DTCS
b) Post calibration save - Archives customer settings after post calibration reset
c) Post calibration reset - Resets radio default settings and restores customer data stored in post calibration save
d) Privacy reset - Clears customer data
7) Touchscreen Calibration
To enter the Service Menu:
1) Turn ignition off for 15 seconds
2) Press and hold power and mute button while turning ignition to accessory.
3) Continue to press for 2 seconds after warning screen is displayed.
4) Release power and mute button and accept the warning
The Service Menu will display the following options:
1) DTCS
2) Audio a) EG (serves no purpose) b) Speaker test(s)
3) Display (test the LCD display brightness and color consistency)
4) Key input (test the face plate hard keys, handlebar switches, and passenger controls)
4) Component menus (XM and Digital Audio Radio Service)
a) Module version-displays the XM versions
b) Subscription info
c) Signal status
d) XM antenna state (unsupported, detected, not detected, short, and unknown)
e) Tone generation (allows for generating left or right audio tone generated by the xm module)
f) Navigation setting (no diagnostic value)
g) GPS status (displays a graphical representation of GPS satellite position&signal strength)
H) Tuner-displays the current frequency, signal strength, RDS/RBDS info for each tuner.
I) Compass indicates current direction
5) Version information (sub menus show navigation and database versions but offer no diagnostic help.
6) Reset
a) Precalibration reset - Restores factory settings and recommended when there are no problems or DTCS
b) Post calibration save - Archives customer settings after post calibration reset
c) Post calibration reset - Resets radio default settings and restores customer data stored in post calibration save
d) Privacy reset - Clears customer data
7) Touchscreen Calibration
Road Captain
Joined: Jun 2009
Posts: 605
Likes: 1
From: Ohio
Now I see your previous message. I have always had to turn on bluetooth on my bike and repair with my S4.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Road Captain
Joined: Sep 2012
Posts: 648
Likes: 152
From: Tampa, FL
Will this remove the Aux Input configuration if it's been activated by the dealer? It really chaps to have to pay the dealer to activate that port.
Stellar HDF Member
Joined: Mar 2009
Posts: 2,454
Likes: 58
From: Graysville, AL
I have noticed mine doing some weird things the past few rides. The unit will turn itself on and off. I have it on turn the bike off for a gas stop then turn the bike back on the unit has to be powered back on. It also will switch from media to tuner but not every time. I may try a reset and see if that helps the issues.