When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a bone stock 2015 limited low, I would like to change slip ons but want something with a little rumble, just above stock. Any suggestions? If I decat header does it give very much more sound? Was looking at Rinehardt, if put on them and decat do I have to remap? Will that make it very loud?
I know this is to personal taste but would like a few suggestions, thanks for a great site.
4" Rineharts are my personal Favs I had them on stock pipe and both V and H Dresser duels and True Duels. Im a believer in tuning to add a little more fuel to the system. I now have moved the mufflers over to my 16 Road Glide without the headpipe, Its way to quite now
I'm pretty new to the Big Twins, but pretty much felt the same as you when I bought my 2014.
I would suggest that you either decat your stock pipe, or buy a new decatted header to begin the process. You will certainly eventually need to buy a tuner also, because these things are pretty lean from the get go.
Your exhaust tone will be louder with a decatted header, might be just right for you with the stock slip-ons.... Who knows?
I tried to step around not getting a header or decatting. It just eventually ended up costing me more $ in the end.
Good luck in your process.
might as well do a stage 1 complete A/F , Tuner , Headers , And Mufflers its worth the cost IMO , and install your self keeping the labor cost in your pocket
Rush Big Louie's - Great CS and good sound.... Talk to Katfish
Keep in mind - what sounds good to me may sound like Crap to you - and if you keep the 'Cats' it can only sound so good... I have decided to leave it in to Not have to battle with the 'warranty police'
Last edited by harley0711; Sep 27, 2016 at 08:53 PM.
yes sir catfish got me set up right with 4inch big louies 2.25 baffles and 103HO headers a word of warning use OEM exhaust gaskets S/E would not seal I found out the hard way installing a second time
Just above stock for me is decat and Harley CVO mufflers. $200 for the mufflers from eBay. Don't bother with that expensive aftermarket stuff till you hear this.
I added a K&N filter and tuner, bike runs great for the last 2-1/2 years.
Just above stock for me is decat and Harley CVO mufflers. $200 for the mufflers from eBay. Don't bother with that expensive aftermarket stuff till you hear this.
I added a K&N filter and tuner, bike runs great for the last 2-1/2 years.
I think Oldmike has the right setup for you. If you don't want to decat you OEM header, Cycle Shack, Super Trapp and Fuel Moto make OEM headers without the cat. Then all you have to do is choose your SE muffler.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.