1.20.3
1. Turn IGN Switch OFF. Wait 15 seconds.
2. Press and hold power/mute button. Turn IGN Switch to the ACC position.
3. Continue to press power button for 2 seconds after the WARNING screen is displayed.
4. Release power/mute button and accept warning.
The service menu may display Diag Service not Available when a menu option is initially selected. This message will clear once the system has finished performing the power-on process.
Options are:
- DTCs,
- Audio,
- Display,
- Key input,
- Component menus,
- Version info,
- Reset,
- Touchscreen.
Reset:
Pre-calibration reset:
- Restores factory default settings.
- This is recommended when there are radio symptoms and no DTCs.
Post calibration save:
- Archives customer’s settings so that they can be restored after a Post calibration Reset.
Post calibration reset:
- Resets the radio to factory default settings and restores the last archive data stored during Post calibration Save.
Agree having "Accept" screen disappear on its own is big improvement.
Another issue I was having (haven't seen it mentioned before) was when I would load more than one ipod playlist to the Favorites menu, when the ignition cycled it would change all the slots to the last one I saved, so they all would have the same playlist on them.
This issue seems to be rectified with the new update. I haven't ridden with it yet (maybe tomorrow?) and I did lose my favorites and saved addresses in the Nav, but all my other settings were intact. I'd give this one a thumbs up at this point.
As a side note, I connected to BT through the Boom while I was out, but when at home, I opened the music app and then started it through the Boom. Maybe that was the problem.
I did the 1.20.3 CVO update, a couple weeks back.
Date Released: 01/17/2017
Version: 1.20.3
Change Log:
Fixes
Radio stuck in OFF mode on start up in certain instances.
Radio goes to OFF mode when is USB removed during start
up in certain instances.
Various fixes for blank or frozen screen issues during
operation in certain instances.
Various bug fixes.
The Best of Harley-Davidson for Lifelong Riders
Boom! Box 6.5GT
Date Released: 10/17/2016
Version: 1.20.2
Improvements
ˇ Support for quarterly dealer database updates and database version screen.
ˇ Switch to call screen when call initiated from phone.
ˇ Headset sidetones added for CB.
ˇ Prompt user to transfer active call to device at key off.
ˇ Default zoom level set for Maneuvers.
Added Features
ˇ Siri functionality has been added. Hold Voice Recognition button for 5 seconds to activate.
ˇ Added media browsing over Bluetooth for iPhone.
ˇ New feature to allow searching for another address while still having an active route.
Fixes
ˇ Allow Nav and Dealer USB update prior to Navigation Loading.
ˇ Post Code entry for HDI and ROW radios has been re-enabled.
ˇ Media pause after fast forward.
ˇ Activation code issue when USB drive is removed and reinserted.
ˇ Navigation data fields no longer overlap next turn during recalculation.
ˇ Japan radio shows Setup button twice.
ˇ Weather map zoom level persistence.
ˇ Passenger Intercom volume shows “off” when driver adjusts.
ˇ Prevent import of Nav destinations with incomplete data.
ˇ Media remains paused after multiple rapid prompts.
ˇ Roadway icons overlap in traffic list.
ˇ Improved indexing time for USB devices with large numbers of media files.
ˇ Bluetooth connection persistence.
I did the .2 version and had to remove it.
Right now, my current version is working just fine. Think I will leave it there for the Florida trip. I had XM installed over the winter - so, will just ride with that for a while and see how things go. Will activate XM the end of this month just to check that out.










