When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just turned over 4100 miles today. I started feeling the familiar Harley wobble about two weeks ago. Went to the dealership this morning to try and get it taken care of. The service manager said that at the last Tech School meeting they discussed this specifically on the 2014's. He said that they won't even look at the neck bearing for the 5k service because it was "up to spec after the 1K", I have to wait until the 10k or else i'll be charged possibly over an hour for them to tighten it up. After my dealership visit I took her up the mountain on the interstate and it was wobbling real bad in the sweepers. Just wondering if anyone else is having wobbling issues on the Rushmores and what you're doing about it.
interesting. I had "wobble" a couple of weeks ago and a buddy in front of me on a night train had something similar in the same corner...we were clipping along real good and it got my attention. I went through several corners after that and since and had no wobble or other adverse cornering issues. I am assuming you checked tire pressures, etc...to make sure everything was good.
When I first noticed it I had the girl on the back and she did not like that one bit. I knew what it felt like cuz my dyna did it all the time. The first thing I did when I got home was check the tires, they were only 2-3psi low on each so I filled them back up and I think it helped a little. I also adjusted the rear shock to make it a little stiffer thinking it was just swaying cuz it was too low. Again, I think that made an improvement for about 4 days. Then today was when it scared me, looking down a 200 ft drop off wobbling goin 90... Don't want to do that again.
the wobble is produced by the way a Harley is designed (specifically the engine mounting), not by bad steering bearings or tires.
That's the thread that I read right after it started happening. Graham also addresses the fact that the bike must be in tip top shape ie; Tight neck bearings. I truly think that this is the problem. It was running on a rail for me until about 3600 miles. That's when i first noticed it. And i must not be the only one who is having this problem because it was specifically addressed at the tech meeting (according to the manager).
Pay the cost of labor to have it checked,if it is the problem warranty should cover it,if not at least you'll have piece of mind.JMO.Worth the labor charge if your azz is on that bike.
I've noticed that myself, figured it was just me, the wind, or passed it off to worn tires. I'll see what the dealer has to say when I get mine serviced and the front tire replaced tomorrow.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.