When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dumb question, maybe.
I put new grips on the bike not that long ago.
If I switch bars this winter, should I just factor in a set of replacement grips, or will my Kuryakyn ISO grips be salvageable?
You can get a new rubber insert for your left grip.
You can order a replacement thru Kuryakyn.
Womack
Have a 2014 FLHXS. Trying to find bars with a 4" to 6" pull back 12" high. Any suggestions please?
I "think" the Yaffee bars you can get a 6 or 9 inch.. thought I read that somewhere. I was wanting the same thing, but the 9 inch is perfect on the Yaffee Monkey bars I have on mine!!
I can finally post in here. 14" KST Mayhem Bagger Bars with stock brake and clutch lines. I suggest the 15" Namz extensions if you use them and the photo thread on here helped a ton. I guess only tip I might have is use cable lube when wiring. I tried without it at first and after using it I wish I had just started with it.
Just finished putting 10 3/4" KST Mayhems on my 2014 Ultra Limited. Stock brake and clutch lines, had to clip the wire ties holding them on the risers. Used the Harley plug-n-play wire extensions. Skipped the heated grips.. Would have required cut-n-solder extensions, and looked like too much work... And I live in Florida anyway, LOL. 2 hours taking it apart last night, 3 hours putting it together tonight. Tip: get some chain, like the kind they use on dog leashes, with some weight to it. Run that thru the bars and then pull some weed whacker line back through. Use that to pull the wires. Run all the weed whacker lines you'll need at once. Pics coming once it's daylight.
Which makes sense, then theyre only manufacturing one wiring harness for all touring bikes, to save from making so many iterations, like car companies do.
I wish that this were the case...
Main wire harnesses are different on all of the touring bikes.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
