Guys I am wondering if one of you can help me with the Torque specs on the Front Brakes. My service manual is on order from surdyke but this may be my last weekend for well over a month to work on the brakes.

 

Not sure exactly what you're looking for. This is from my '18 service manual, I doubt anything changed between 18 and 19..

Caliper banjo bolt: 14-18 ft lbs
Caliper bridge bolt: 14-18 ft lbs
Caliper mounting bolts: 28-38 ft lbs
Caliper pad hanger pin: 11-14 ft lbs
Bleeder screw: 25-61 in lbs

 

Thank you so much... I was able to get the brakes done and ride the bike to work. There was good and bad in riding the bikes today, traffic was at a dead stop and I could lane split but the reason why it was at a dead stop there was there was an accident and a motorcyclist down in the freeway.