Pullback risers
Thread Starter
|
Tourer
Joined: Nov 2021
Posts: 311
Likes: 120
From: Albany NY
yes I see they ain’t cheap. But whatever, right? Do you guys think I’ll need extensions for doing a plate? Obviously the people at getlowered.com tell me I do, so I can buy from them.
Cruiser
Joined: Mar 2024
Posts: 110
Likes: 39
From: Iowa
a pull back plate that comes back 2 " and up 1" is well. about 3" of stretch. slap one on your cables and wires will need to accommodate.
what i did when installed a plate and risers, before i did i held the bars exactly where they would be and measured where clutch/brake/wires should be plus 1-2" to be safe.
what i did when installed a plate and risers, before i did i held the bars exactly where they would be and measured where clutch/brake/wires should be plus 1-2" to be safe.
Road Captain
Joined: Apr 2015
Posts: 631
Likes: 180
From: Menomonee Falls, Wi
Check out ROX.
https://roxspeedfx.com/collections/m...ndlebar-risers
Also, I have seen them on ebay.
https://roxspeedfx.com/collections/m...ndlebar-risers
Also, I have seen them on ebay.
Tourer
Joined: Jun 2021
Posts: 303
Likes: 146
From: Az
I just installed 10” pullback risers from Boosted Brad (DMR). They fit my riding position perfectly. I have always been a 16” ape guy on all my Harleys (currently have them on three of my bikes) but on this bike I really like this setup. I have a set of Drag 5 1/2 pull backs I just pulled off if you want to give them a try.
Tourer
Joined: Jan 2023
Posts: 448
Likes: 302
From: New Zealand
I have the Trashing supplies 9.5" pull-back risers along with their flat bar, I have just ordered their 1" riser spacers (which should suit me better I'm 6ft), anyone used them?- https://www.thrashinsupply.com/colle...ser-extensions
Intermediate
Joined: Sep 2023
Posts: 49
Likes: 8
From: Kansas
Hard to find spacer
You can add 2" spacers to raise the bars up 2", they will come back a little, plus you can loosen the bar clamp and turn the bar back some towards you... Anything more than 2" higher than what you have will require longer cables. I added 2" spacers and it's almost perfect for me.
I found that hard to believe.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
HDF Community Team
Joined: Nov 2012
Posts: 6,186
Likes: 2,412
From: USA
I don't. There's lots of stuff like that which Harley does not carry or offer. Looking at the bling web page Harley has for the 23 fatboy, there are no spacers listed, and only a few risers.
Road Captain
Joined: May 2007
Posts: 547
Likes: 389
From: PNW
I put 2" LA chopper spacers on my Breakout. work great.
