Install Issues with ignition not powering head unit
Thread Starter
|
Advanced
Joined: Jun 2012
Posts: 99
Likes: 0
From: Roseville, CA
Install Issues with ignition not powering head unit
Need Help on a buddies install.
Alpine CDEHD149BT
Rockford Fosgate T400X480
Alpine Type R SPR-60C 6.5" Components
Alpine Type R SPR-50C 5.25" Components
All Going in a 2010 Roadglide.
1st issue... The HU will only power up on accessory but not with ignition. Checked all connections and can't find anything lose.
2nd issue... What is the Voltage needed to set the amp with all 4 speakers set up as a 4ch...
We are in the middle of it so any help is much appreciated
Thanks!
Alpine CDEHD149BT
Rockford Fosgate T400X480
Alpine Type R SPR-60C 6.5" Components
Alpine Type R SPR-50C 5.25" Components
All Going in a 2010 Roadglide.
1st issue... The HU will only power up on accessory but not with ignition. Checked all connections and can't find anything lose.
2nd issue... What is the Voltage needed to set the amp with all 4 speakers set up as a 4ch...
We are in the middle of it so any help is much appreciated
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
