Adding a second amp with no rca inputs
Thread Starter
|
Advanced
Joined: Apr 2015
Posts: 83
Likes: 0
From: Clinton
Adding a second amp with no rca inputs
I'm thinking about add a second pn4.1000d to my system. Question since the first amp was installed using line-in (no rca) how would I connect the second amp to the radio? I'm thinking about doing the upgrade myself.
Thanks
Thanks
Elite HDF Member
Joined: Aug 2008
Posts: 4,150
Likes: 459
From: S. FL
1. try connecting the rear speaker wires to your harness.
2. You can most likely use the same wires you are using now with no ability to fade
3. If you want to use RCA's you can use hi-lo RCA converter and then run a splitter, again no fade ability.
2. You can most likely use the same wires you are using now with no ability to fade
3. If you want to use RCA's you can use hi-lo RCA converter and then run a splitter, again no fade ability.
Thread
Thread Starter
Forum
Replies
Last Post
