Amp Repair
Thread Starter
|
Road Captain
Joined: Feb 2014
Posts: 745
Likes: 28
From: MN. USA
Amp Repair
Last summer I added lids and installed 8s in the bags.
I bought A Hertz HPD4 for the audio sale page. I have never been able to get it wake up the speakers (especially the 8s) no matter what configuration I used. Today I hooked up a RZ42000d to them and the woke right up. So I'm thinking that I should send the HDP4 in to get checked out. I would rather not just throw it on the shelf not knowing if it is working properly.
Where should I send it? Is there a independent shop or should I try hertz.
Suggestions Please
I bought A Hertz HPD4 for the audio sale page. I have never been able to get it wake up the speakers (especially the 8s) no matter what configuration I used. Today I hooked up a RZ42000d to them and the woke right up. So I'm thinking that I should send the HDP4 in to get checked out. I would rather not just throw it on the shelf not knowing if it is working properly.
Where should I send it? Is there a independent shop or should I try hertz.
Suggestions Please
Thread Starter
|
Road Captain
Joined: Feb 2014
Posts: 745
Likes: 28
From: MN. USA
Hey T.
I am bringing it in to be bench tested in the morning. I will post numbers when it is done.
It is most likely me and my inability to tune things properly but want to make sure.
I am bringing it in to be bench tested in the morning. I will post numbers when it is done.
It is most likely me and my inability to tune things properly but want to make sure.
Ultimate HDF Member
Joined: Mar 2015
Posts: 6,446
Likes: 873
From: TEXAS
Originally Posted by uplandpinter
Hey T.
I am bringing it in to be bench tested in the morning. I will post numbers when it is done.
It is most likely me and my inability to tune things properly but want to make sure.
I am bringing it in to be bench tested in the morning. I will post numbers when it is done.
It is most likely me and my inability to tune things properly but want to make sure.
T
Thread Starter
|
Road Captain
Joined: Feb 2014
Posts: 745
Likes: 28
From: MN. USA
i have the 2000 at a angle and it fits ok with Zip ties in multiple directions.
The amp checked out fine. It was me that is not so good. I'm going to runit into the shop and have him help me get it set correctly this time.
The amp checked out fine. It was me that is not so good. I'm going to runit into the shop and have him help me get it set correctly this time.
Thread
Thread Starter
Forum
Replies
Last Post
