When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If you can wait about a month, a brand name company is bringing out a 150x8 amplifier out that will work well in your setup.
Its going to be full range and the size of a Micro2v2. I have been told by them that the MSRP should be $399-$449.
Yep, its done being tested in vehicles now.
Its currently being tested in bike fairings (heat/cooling) now. They want to make sure they knock it out the park with this one.
If you can wait about a month, a brand name company is bringing out a 150x8 amplifier out that will work well in your setup.
Its going to be full range and the size of a Micro2v2. I have been told by them that the MSRP should be $399-$449.
Yep, its done being tested in vehicles now.
Its currently being tested in bike fairings (heat/cooling) now. They want to make sure they knock it out the park with this one.
150x8 would be perfect for most folks running speakers in the most popular four locations of fairing, lowers, pods, and lids. I am quite interested myself but I also have to wonder with that much power if it trashes FM.
As of late there have been a few good radio stations just barely out of range around here that cater to middle age folks so to speak. I was thinking of upgrading to a Rockford amp in the future to get some FM reception range back.
How did that setup go? Im gathering components now and currently plan on 6x9 Polk MMs in the fairing and lids and 6.5 Polk MMs in the lower faring. Was thinking about also adding the Hertz 200.1 midrange or 200L 8 subs in each bag and powering all 8 speakers with two Arc Moto 600.4 amps and a Kenwood KRC-M318BT HU. Any suggestions or advice?
Yep, its done being tested in vehicles now.
Its currently being tested in bike fairings (heat/cooling) now. They want to make sure they knock it out the park with this one.
Dragging this one out of the grave. Is this thing ever going to make it to market?
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.