Dsp with BT355

Reply Subscribe

Thread Tools

Search this Thread

Sep 29, 2019 | 12:00 PM

GunslingersNation1

Thread Starter

Road Captain

Joined: Jul 2019

Posts: 720

Likes: 48

From: Fort Worth

Dsp with BT355

So I posted for a friend who needed to get his system installed in Dallas. He got it in, and now wants a dsp. Has anyone used a dsp with the bt355s?

Sep 29, 2019 | 12:23 PM

Outkast6991

Road Master

Joined: Aug 2015

Posts: 1,196

Likes: 106

From: Lancaster pa

Quote:

Originally Posted by GunslingersNation1

So I posted for a friend who needed to get his system installed in Dallas. He got it in, and now wants a dsp. Has anyone used a dsp with the bt355s?

Why would you filter whats going into your dsp? That's the whole purpose of it. It's one or the other

Sep 29, 2019 | 12:46 PM

GunslingersNation1

Thread Starter

Road Captain

Joined: Jul 2019

Posts: 720

Likes: 48

From: Fort Worth

No clue what he wants. He is asking me, and I have no experience with the bt355s. in my opinion, he should swap head units then run the dsp.

Sep 29, 2019 | 12:53 PM

Outkast6991

Road Master

Joined: Aug 2015

Posts: 1,196

Likes: 106

From: Lancaster pa

Quote:

Originally Posted by GunslingersNation1

No clue what he wants. He is asking me, and I have no experience with the bt355s. in my opinion, he should swap head units then run the dsp.

I hear ya man. Nothing really wrong with the stock head unit once a dsp is in play though. Especially if water is a concern. Just tell him to switch to a regular loc instead of the 355

Sep 29, 2019 | 12:57 PM

GunslingersNation1

Thread Starter

Road Captain

Joined: Jul 2019

Posts: 720

Likes: 48

From: Fort Worth

Quote:

Originally Posted by Outkast6991

I hear ya man. Nothing really wrong with the stock head unit once a dsp is in play though. Especially if water is a concern. Just tell him to switch to a regular loc instead of the 355

Is there a way to do high level from the factory HU to a dsr1?

Sep 29, 2019 | 01:24 PM

No U Glider

Road Warrior

Joined: Jul 2016

Posts: 1,416

Likes: 187

From: Near St. Louis Mo.

Quote:

Originally Posted by GunslingersNation1

Is there a way to do high level from the factory HU to a dsr1?

I bought front and rear wiring harnesses from AHB on one end is a connector for the stock head unit and the other is RCA's that I ran into the DSR-1. Appears they have some resistors or something else in the lines. IMHO over priced at about $80 a pop shipped but it made for a plug and play solution....

Last edited by No U Glider; Sep 29, 2019 at 01:52 PM.