BT7P1 Install ?
Thread Starter
|
Road Warrior
Joined: Jul 2011
Posts: 1,323
Likes: 13
From: Wisco!
BT7P1 Install ?
Im upgarding my current audio again on my 05' electra glide My ? is I originally had the BT Titan II's 6.5" in the fairing per there install instructions as of last year. Im now installing the 7P1's in the fairing and they say to use the new #10x7/8" screws for the 7P1 adapter rings PROBLEM IS when I removed the original screws from the titans adapter rings the new screws just strip out like there not the same as the titans had? Have any of you had this problem and if so what did you end up doing?
I was thinking of using the old screws from the Titans but the way the new 7P1 adapters are made they look like they may come through the inner fairing?
I was thinking of using the old screws from the Titans but the way the new 7P1 adapters are made they look like they may come through the inner fairing?
Thread Starter
|
Road Warrior
Joined: Jul 2011
Posts: 1,323
Likes: 13
From: Wisco!
Update: I re-used the old screws but I cut down the lower mount screw for each adapter about a 1/4" inch were back in business. BT7P1's are in.
Last edited by badazzpred; Aug 16, 2013 at 01:54 AM.
Thread
Thread Starter
Forum
Replies
Last Post
