Car stereo Capacitor
Thread Starter
|
Road Captain
Joined: Apr 2009
Posts: 584
Likes: 0
Car stereo Capacitor
Has anyone added / put a add on stereo auto Capacitor under the fairing to help the amp and charging system ?
even if nothing more than to take the strain off
not that we push any Bass
just wondering
even if nothing more than to take the strain off
not that we push any Bass
just wondering
Extreme HDF Member
Joined: Nov 2007
Posts: 14,670
Likes: 139
From: East of the Sun, West of the Moon
a capacitor is not necessary and just adds one more point of failure for these systems. If you are using an amp that draws high current then the need might be there but Class D, G, H amps don't draw very much current from the charging system at all with Class D drawing less than all the others.
GlacierPearl, myself, among others are running multiple large amps in the tourpak and nary an issue. Matter of fact here is a pic of my current meter measuring the draw on my 2 TN4.900D amps at a volume level that will make your ears bleed. this was taken over a 20 minute time frame with the meter set to record the highest peak in amperage draw.
4.7A.. that even surprised me...
GlacierPearl, myself, among others are running multiple large amps in the tourpak and nary an issue. Matter of fact here is a pic of my current meter measuring the draw on my 2 TN4.900D amps at a volume level that will make your ears bleed. this was taken over a 20 minute time frame with the meter set to record the highest peak in amperage draw.
4.7A.. that even surprised me...
Thread Starter
|
Road Captain
Joined: Apr 2009
Posts: 584
Likes: 0
I still am wondering if just a 1 Farad Cap might help a PBR 300x4 survive
I have a new PBR 300x2 in plastic that i was gonna replace my current Alpine KTP with but I may go to a 300x4.
I still am thinking of trying 4 of the Pioneer TS-D1602R 6.5 in the Fairng and Lowers.
Even though I now Biketronics is the way to go
Just cant spend all that right now
I have a new PBR 300x2 in plastic that i was gonna replace my current Alpine KTP with but I may go to a 300x4.
I still am thinking of trying 4 of the Pioneer TS-D1602R 6.5 in the Fairng and Lowers.
Even though I now Biketronics is the way to go
Just cant spend all that right now
Outstanding HDF Member
Joined: Mar 2012
Posts: 2,843
Likes: 0
From: Michigan
I still am wondering if just a 1 Farad Cap might help a PBR 300x4 survive
I have a new PBR 300x2 in plastic that i was gonna replace my current Alpine KTP with but I may go to a 300x4.
I still am thinking of trying 4 of the Pioneer TS-D1602R 6.5 in the Fairng and Lowers.
Even though I now Biketronics is the way to go
Just cant spend all that right now
I have a new PBR 300x2 in plastic that i was gonna replace my current Alpine KTP with but I may go to a 300x4.
I still am thinking of trying 4 of the Pioneer TS-D1602R 6.5 in the Fairng and Lowers.
Even though I now Biketronics is the way to go
Just cant spend all that right now
Outstanding HDF Member
Joined: Mar 2009
Posts: 2,930
Likes: 4
From: OHIO......UGH !!
Speak for YOURSELF !! I have ground shaking bass !!!
Thread
Thread Starter
Forum
Replies
Last Post
