Riser help Please!!!!
Thread Starter
|
Stellar HDF Member
Joined: Feb 2015
Posts: 3,405
Likes: 1,114
From: USA
Riser help Please!!!!
Maybe a dumb or already asked question, I'd like to add a couple inches to my risers, I believe the current stock set up on my 04 FXDI is about an inch, I like to pull the bars back a bit and up, looking at DS's 3.5 pullback.
Anyone feel I'll have any issues with my stock cables & wires?
Thanks in advance guys.
http://www.ebay.com/itm/Drag-1-Pullb...7c4010&vxp=mtr
Anyone feel I'll have any issues with my stock cables & wires?
Thanks in advance guys.
http://www.ebay.com/itm/Drag-1-Pullb...7c4010&vxp=mtr
Last edited by 04FXDI; Apr 29, 2015 at 12:02 PM.
Thread Starter
|
Stellar HDF Member
Joined: Feb 2015
Posts: 3,405
Likes: 1,114
From: USA
Ok, I guess thats a thought, didn't think of it. New to Harley and haven't owned a bike in nearly 30yrs, so Im a lil rusty.
Thanks
Thanks
Outstanding HDF Member
Joined: Apr 2006
Posts: 2,555
Likes: 3
From: Clarksburg, PA
I don't know if you bought those other ones or not, but I have used the 6" Duece style on my Bob and my brother's Superglide with stock cables.
In fact, on mine, I even made another spacer for under them:
They have a thin nub on the bottom you just cut off to be flush:
If you were interested, I just so happen to have some fat drag bars and a set of those risers...real cheap $ for you!
In fact, on mine, I even made another spacer for under them:
They have a thin nub on the bottom you just cut off to be flush:
If you were interested, I just so happen to have some fat drag bars and a set of those risers...real cheap $ for you!
Thread Starter
|
Stellar HDF Member
Joined: Feb 2015
Posts: 3,405
Likes: 1,114
From: USA
Thanks my man, I ended up grabbing the DS 1" back, 3.5" up risers, taking a couple days off the latter part of next week....going to install the risers and tackle my fork polishing project.
Thanks Again
Thanks Again
3rd Gear
Joined: Apr 2015
Posts: 7
Likes: 0
From: USA
i'm also going to do 3 1/2 inch risers, but straight up. but to be on the safe side I bought all new cables with an extra two inches of length. I already have mini 8's on the bike, just want a little more height without buying new bars. but I also bought a speedo relocation kit and also have a joker machine top clamp with a hole cut for the indicator lights.
Thread
Thread Starter
Forum
Replies
Last Post
