Fork Oil
Thread Starter
|
Road Master
Joined: May 2012
Posts: 1,023
Likes: 18
From: OREGON
Fork Oil
Rebuilding the forks due to the tubes are bent. FXDX adjustable with Race Techs, internally preloaded (spacers), and sprung for my weight. Prefer a stiffer frontend, but don't want it walking on me in high speed corners. I was running the E, with somewhat unsatisfactory results. I'd like a bit stiffer on braking.
Any suggestions? Thanks...
Any suggestions? Thanks...
Road Warrior
Joined: Dec 2010
Posts: 1,632
Likes: 46
From: East Hartford, CT
I ride my bike hard and come across allot of unexpected situations where I use the extra that you get with the Works triple rated springs.
Teamed up with the Riccor intiminators and the new VT front mount I wouldn't t change a thing.
I use the recomended Amsoil 10Wt shochtheraphy fork oil. I weight 195 lbs.
I took an inch off the preload spacers and used 23 ozs in each tube.
Teamed up with the Riccor intiminators and the new VT front mount I wouldn't t change a thing.
I use the recomended Amsoil 10Wt shochtheraphy fork oil. I weight 195 lbs.
I took an inch off the preload spacers and used 23 ozs in each tube.
Seasoned HDF Member
Joined: Jun 2014
Posts: 5,476
Likes: 6,356
From: pacific northwest
I ride my bike hard and come across allot of unexpected situations where I use the extra that you get with the Works triple rated springs.
Teamed up with the Riccor intiminators and the new VT front mount I wouldn't t change a thing.
I use the recomended Amsoil 10Wt shochtheraphy fork oil. I weight 195 lbs.
I took an inch off the preload spacers and used 23 ozs in each tube.
Teamed up with the Riccor intiminators and the new VT front mount I wouldn't t change a thing.
I use the recomended Amsoil 10Wt shochtheraphy fork oil. I weight 195 lbs.
I took an inch off the preload spacers and used 23 ozs in each tube.
Thread
Thread Starter
Forum
Replies
Last Post
