Getting ready to pull the inner primary...
Thread Starter
|
Elite HDF Member
Joined: Oct 2009
Posts: 4,416
Likes: 88
From: San Quirino, Italy
Getting ready to pull the inner primary...
Getting ready to put the mid controls back on my Streetbob. I have short legs and the forwards (even the reduced reach) are too far to be comfortable on long trips. The wind pulls my legs off...Anyway, I am going to pull the inner primary. Any gotchas I need to watch out for? The last time I did this, it was on an evo...I will also have a new set of powder black forwards and the reduced reach kit for sale real shortly if anyone wants it...
Elite HDF Member
Joined: Sep 2012
Posts: 3,791
Likes: 57
From: N Texas
My install Thread might help:
https://www.hdforums.com/forum/dyna-...-mids-mod.html
Take your time and clean all the fasteners you reuse and the thread holes too!
https://www.hdforums.com/forum/dyna-...-mids-mod.html
Take your time and clean all the fasteners you reuse and the thread holes too!
Thread
Thread Starter
Forum
Replies
Last Post
