Started removing my intake manifold
Thread Starter
|
Seasoned HDF Member
Joined: Dec 2010
Posts: 6,849
Likes: 1,389
From: Florida
I worked today and tomorrow so no forward progress but if you ever wanted to see the difference between 00-05 and 06-up style flanges here is your opportunity
06-up on top 00-05 on bottom
You can see when overlapped why I had an intake leak because the 00-05 is slightly off center when overlayed
06-up on top 00-05 on bottom
You can see when overlapped why I had an intake leak because the 00-05 is slightly off center when overlayed
Advanced
Joined: Nov 2015
Posts: 99
Likes: 6
From: Michigan
For those that do this a wee bit more often, this is a nice add to the tool box. Good catch on the intake flanges.
Thread Starter
|
Seasoned HDF Member
Joined: Dec 2010
Posts: 6,849
Likes: 1,389
From: Florida
Got my intake back on with the new flanges. Started tightening everything up and put my air cleaner backing plate on to align everything nice
Then plugged everything back in and relaxed the top motor mount
Then the horn
I did manage to put everything back on somewhat without locking down my pushrods. So tonight I will have to tighten those down
Then plugged everything back in and relaxed the top motor mount
Then the horn
I did manage to put everything back on somewhat without locking down my pushrods. So tonight I will have to tighten those down
Thread
Thread Starter
Forum
Replies
Last Post
