Handlebar Build
Thread Starter
|
Road Master
Joined: Sep 2015
Posts: 1,020
Likes: 130
From: Vancouver
Handlebar Build
2015 Street Bob, I live in Canada so I ship everything to a US post office box. Just need some opinions on if I'm missing anything on my bulk order for my build.
1. Bars: Wild1 Chubby bars 14" (already in my possession)
2. Signals: Custom Dynamics TruWRapz LED wrap around fork signals (amber)
3. Heated Grip Inserts: Symtec Heat Demon Grip Warmers
4. Grips: Avon Custom Contour Grips
5. Bushings: Arlen Ness Polyurethane Riser Bushings
6. Mirrors: No change, will have to see what works best after the setup change
7. Powdercoat current levers and stock riser
8. Additional wiring: Harley pigtail to run Grip warmers to Aux
Question: Anything else I'm missing or should change out during the overhaul? I have to order everything at once since I have to make a 2 hour drive to the depot so just want to make sure I'm not missing anything on my build.
*I'm expecting I won't need to change my cables since when I measure it out, there's only about 2 inches from stock bars to the new setup.
Thanks in advance
1. Bars: Wild1 Chubby bars 14" (already in my possession)
2. Signals: Custom Dynamics TruWRapz LED wrap around fork signals (amber)
3. Heated Grip Inserts: Symtec Heat Demon Grip Warmers
4. Grips: Avon Custom Contour Grips
5. Bushings: Arlen Ness Polyurethane Riser Bushings
6. Mirrors: No change, will have to see what works best after the setup change
7. Powdercoat current levers and stock riser
8. Additional wiring: Harley pigtail to run Grip warmers to Aux
Question: Anything else I'm missing or should change out during the overhaul? I have to order everything at once since I have to make a 2 hour drive to the depot so just want to make sure I'm not missing anything on my build.
*I'm expecting I won't need to change my cables since when I measure it out, there's only about 2 inches from stock bars to the new setup.
Thanks in advance
Stellar HDF Member
Joined: Feb 2016
Posts: 2,066
Likes: 259
From: Northstreet, michigan
Looks like you've got everything to me. I had 16s on my 15 street bob. I had to do clutch cable and a brake line. No wiring. Think you'll be good to go for 14s. I would highly suggest heated grips over grip warmers. I have the 200 dollar plain black grips from HD. They look factory and get really ****in hot.
Thread
Thread Starter
Forum
Replies
Last Post
